Question about Honda Accord
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hey, here's the procedure, disable air bag, if equipped w/ one, disconnect the pump return hose from the reservoir and place the end in a large container. Plug the port in the reservoir. Start the engine and turn the steering wheel lock to lock several times, until fluid stops running from the hose. Turn off engine immediately. Re-attach hose. Disconnect the inlet and outlet hoses at the pump. Remove the drive belt. Remove the mounting bolts/nuts and remove pump.
Install in reverse order. Adjust belt tension,fill ps reservoir and bleed any air from the system (to bleed air from system, fill reservoir, start engine and allow to idle, turn wheel from side to side all the way several times. Shut off, fill if necessary.
. Tighten bolts to : Thru bolt 30 ft lbs., mounting nut 16 ft lbs.
Posted on Dec 30, 2008
there is a pinch bolt that holds it in, make sure you straighten the steering wheel first and lock it down with something so it cant move, then remove the pinch bolt and the pressure and discharge lines from the rack there are return lines within the rack that go side to side, you dont need to remove those. Make sure the replacement rack is even when putting back into steering yolk
Posted on Sep 02, 2009
when it comes to the power steering hose I would say just do it yourself. As for the rack and pinion it will probably cost you quite a few hours of labor. anywhere from 5-9. Its up to you!
Posted on Oct 19, 2009
The part from the dealer is $180.65 ,labor is .5 hours about $50. If you go to a independent shop the cost should be less:)
Posted on Nov 24, 2009
Here is a good link. Check out the video. Changing the pump is a pretty simple task, especially if you bought the pump with a new pulley. If you only have the pump you will need a pulley removal/installation tool. Check your belts to see if they need replacing because now would be a good time to do it since they have to come off to take off the power steering pump.
Posted on Jan 09, 2010
Tips for a great answer:
Jul 21, 2013 | Cars & Trucks
Mar 03, 2013 | Cars & Trucks
Dec 30, 2010 | Honda Accord Cars & Trucks
Sep 20, 2010 | 2007 Honda Accord Sedan
Aug 31, 2009 | 1994 Honda Accord
Aug 15, 2009 | 1996 Honda Accord
Dec 02, 2008 | 1992 Honda Accord
205 people viewed this question
Usually answered in minutes!