Question about 2004 Ford Expedition

3 Answers

2004 ford expedition eddie bower

How do you open and close the very back windows, they are both slightly open about a 1/4 inch and I can't figure out how to close them. Are they like most conventional windows where you pop it out using the hinge and snap it back in the same way because I can't get the visible attachment (hinge) to move any way.

Thanks Keith Woolard

PS My wife who I just bought this for also wants to know how to set the driver side mirror not to go up every time she opens the door and gets out. By the way the dealer we bought this from has ordered us a manual, we're waiting.

Posted by on

  • 2 more comments 
  • jkwoolard Apr 24, 2010

    I have a free manual on the way now, but I do now have another problem. The grandkids did something to the interior lights and we can't figure out how to reset them to come on when we get in and dim off when we get out.
    I need the answers to my questions badly, I'm OCD and its driving me nuts. And yes I do take medication for it they don't make enough bourbon to help the problem.

    Keith

  • jkwoolard Apr 24, 2010

    This sounds like he knows what hes doing - at least by scads more than an idiot like me, never did relate to mechanics.

    Can you please tell me about the back windows and the lights as well?
    Please Please!

    Keith

  • jkwoolard Apr 25, 2010

    thanks a lot - i received my owners manual today and I was right the back windows are electric I just didn't know where to find the toggle.



    Keith Woolard

  • jkwoolard Apr 25, 2010

    THANKS FOR ALL THE HELP YALL, BUT AS USUAL IT WAS OPERATOR HEADSPACE. SIMPLE FIXES ALL AND ALL DONE NOW BUT STILL READING.



    THANKS AGAIN



    KEITH WOOLARD

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

The window and track may be misaligned, you can try to pull up on it while some else pushes the button to re-align it. Otherwise the panel will have to be removed to gain access to the motor, window and track.

The mirror may be loose and causes it to move when the door is shut. When you are not using the mirror function, place the switch directly in the middle between Left and Right.

Posted on Apr 27, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

For the rear window, just need adjuts the both slightly...


Check the next procedure to Power Mirrors...

Diagnosis & Testing

The exterior mirror control switch receives power through circuit SBP12 (GN/RD) and ground through circuit GD143 (BK/VT). The exterior mirror control switch uses circuit CPM23 (GY) as the common circuit for both exterior mirror up/down and right/left movement.

  1. Possible Causes:
    Fuse 12 (7.5A) (SJB) An open in circuits CPM23 (GY), SBP12 (GN/RD) or GD143 (BK/VT A short to ground in circuit CPM23 (GY) A short to voltage in circuit CPM23 (GY) Exterior mirror control switch.
  2. Checking the voltage at the mirror switch:
    Key in OFF position. Disconnect: Exterior Mirror Control Switch C527. Key in ON position. Measure the voltage between ground and exterior mirror control switch C527-1, circuit SBP12 (GN/RD). Voltage should be greater than 10 volts.
  3. If voltage is greater than 10 volts, check that fuse 12 (7.5A) is OK. If OK, REPAIR circuit SBP12 (GN/RD) for an open.

Exterior Mirror Motor Synchronization

NOTE This procedure must be performed any time the power folding mirrors are manually folded in or out, or if the position of the mirror case has been moved without using the mirror control switch.
NOTE If the power folding mirrors are folded or unfolded continuously (6 to 10 cycles), the power lockout feature will disable the system for 2 minutes to prevent damage to the power fold motors. After 2 minutes have elapsed, normal operation will resume.
  1. Set the mirror control switch to the CENTER position.
  2. Use the mirror control switch (press rearward) to automatically cycle the power folding mirrors in and out 4 times.
  3. When an audible popping sound is heard, the power folding mirror motors are synchronized.
    NOTE It may be necessary to cycle the power folding mirrors in or out up to 4 times before they are synchronized.

Removal & Installation
Motor
  1. Before servicing the vehicle, refer to the precautions section.
    NOTE If equipped with power folding mirrors, they must be synchronized any time the mirrors have been folded or unfolded without using the mirror control switch. Refer to synchronization procedure.
  2. Position the exterior mirror glass in a downward position to obtain a gap at the edge of the mirror.
    CAUTION Place a shop towel between the exterior mirror glass and the hand to avoid personal injury in the instance of glass breakage.
  3. Insert a flat-blade screwdriver between the mirror glass tabs and the mounting plate, and rotate to separate the locking tabs from the mounting plate.
  4. Carefully pull the top edge of the glass away from the exterior mirror housing.

    2004 ford expedition eddie bower - 0996b43f802029e0.jpg Fig. Mirror Glass removal shown
  5. If equipped, disconnect the heated mirror electrical connectors and remove the glass.
  6. Remove the 3 exterior mirror motor screws and exterior mirror motor.
  7. Disconnect the electrical connectors.
  8. To install, reverse the removal procedure.

Switch
Expedition Trim Panel Removal

NOTE The door glass must be completely raised.
  1. Remove the window control switch plate.
  2. Remove the door handle bezel.
    WARNING To avoid damage to the door trim panel, lift the door trim panel by pulling directly upward on the armrest to disengage the panel clips.
  3. Remove the two bolts and three screws, and remove the door trim panel.
  4. Remove the finish cover to access the two center screws.
  5. Disconnect the electrical connectors. Navigator Trim Panel Removal
  6. Remove the door handle bezel.
  7. Use service notch.
    WARNING To avoid damage to the door trim panel, lift the door trim panel by pulling directly upward on the armrest to disengage the panel clips.
  8. Remove the two bolts and three screws, and remove the door trim panel.
  9. Disconnect the electrical connectors.
  10. Depress the locking tabs and remove the exterior mirror control switch.
  11. Remove the exterior mirror control switch.

If you dont want waiting more time for the Owners Manual, can check here this choice 2004-Ford-Expedition-Owners-Manual

Hope this help.

Posted on Apr 24, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

Go to scribd.com and register(it's free and they don't send you junk mail) and I know they have a 03 manual you can download for free!

Posted on Apr 23, 2010

  • Kori Policy
    Kori Policy Apr 24, 2010

    If it's ok with you, send me your email and I will send you 03 manual. It sounds like they turned the lights off...period. You're right too, they don't make enough bourbon but they do make an ample amount of scotch, lol. iambanshee74@yahoo.com

  • Kori Policy
    Kori Policy Apr 25, 2010

    I'm glad to hear that the book arrived so quick and that the windows are now closed. Did it help with the lighting issue as well?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blow-ed out a spark plug--- 2000 Ford Expedition--Eddie Bower edition. V-8


This happens way more than it should. Go online and read history on this engine. AboutAutomobile.com has full defect reports by NHTSA, Tech Service Bulletins, Owner Complaints.

Some use a Helicoil to try to fix this. About only good point is that sparkplugs are 100,000 mile type and may not need to be serviced again. Buy only 1 piece sparkplug as replacement.

Sep 14, 2013 | 2000 Ford Expedition

1 Answer

Need my seat to move another inch back after it is fully back, anat the back stop.


With electric seats youmay be able to reset the limit stop for the electrics but I am guessing you will have to lengthen the track part of the seat fitment

Feb 24, 2013 | 2004 Ford Expedition

1 Answer

What is the spark plugs gap size for a 2006 expedition Eddie bower


Without the engine size I would only be guessing.You can call your local auto parts store and they can provide you with the information that you are requesting.

May 10, 2011 | 2006 Ford Expedition

1 Answer

Is there an override to open the back window without power to it on a 04 eddie beaur ford expidition?


I dont know ,but you could find out if you call a ford dealership,,,,parts counter

Mar 16, 2011 | 2004 Ford Expedition

1 Answer

Im looking for parts for my 98 expedition and I would like to know what years can be used? I need to replace my drivers side window and some other little things, I have someone willing to sell me a 2000...


typically the 97 to 02 will interchange, but only the main parts. the difference in model such as the packages like xlt/eddie bower will be the difference.

Jan 04, 2011 | 1998 Ford Expedition

1 Answer

A 2004 Ford Expedition Eddie Bauer driver side window not working


The entire assy. This uses a cable system and what you are hearing is the cable twisting and getting ready to snap. New units are available at Advance Auto parts

Jan 14, 2010 | 2004 Ford Expedition

1 Answer

Installing stereo ford expedition- eddie bower 1997


I do not need solution anymore. thank you. We will take it to the dealer and they will install the part for us..
thanks.

Oct 08, 2009 | 1998 Ford Expedition

1 Answer

2001 Expedition won't start


on the driver's side of the engine by the injectors and ignition coils

Oct 14, 2008 | 2000 Ford Expedition

1 Answer

2000 ford expedition eddie bower suspension


If you change the standing height of your 2008 silverado this could void your warranty.Please check with your local chevy dealers service dept.Best of luck.

Jun 22, 2008 | 2000 Ford Expedition

Not finding what you are looking for?
2004 Ford Expedition Logo

999 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...