Question about 1995 Chevrolet Monte Carlo

1 Answer

No turn signals or hazards???

I just bought a 1995 Monte Carlo 3.4 with no working turn signals or hazards what could this be caused by

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 17,970 Answers

Check the FLASHER unit; the turn signal flasher is mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located in the component center, under the instrument panel, on the right side. Replace the flasher by unplugging the old one and plugging in the new one.

Hazard flasher -->> The Flasher is located: Front seating area, passenger side, under dash, below glove compartment, mounted in fuse panel

Turn signal -->> The Flasher is located: Front seating area, driver side, under dash, mounted on passenger side of steering column

Good luck (remember comment and rated this).

Posted on Apr 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hazard/turn signal dont work 2002 monte carlo will not fash nor turn on once in a while indicator light blink for a slight second


you could have a bad flasher unit causing this.you say hazard/flasher not working.do you mean just the signals not working and think the hazards won`t work or are the hazards not working.there are two flasher units one for signal and one for hazards.you could have a problem with the signal switch as well.

Jul 05, 2011 | 2004 Chevrolet Impala

3 Answers

I have a 2004 Monte Carlo, my turn signals and flashers just stopped working, the fuse is good and all the bulbs are good. Does anyone have any other ideas as to what is causing this problem.


The turn signal switch assembly often causes this problem. If the hazard button is on your steering column it is part of the switch assembly and is called a multi-function switch . If it has a separate hazard button on the dash the can also cause the the same thing to happen. Try holding very slight pressure on the hazard button on the dash while the turn signal is on. If it starts working correctly replace only the the hazard switch. It is usually just snapped into the hole in the dash. If the hazard switch is on the column, than you should replace the multi-function switch. If it is equipped with an airbag, be sure the key is off while working on column. The multi-function switch should not require removal of the steering wheel on this car.

Jan 07, 2011 | 2004 Chevrolet Monte Carlo

1 Answer

Location of the turn signal flasher for a 1995 chevrolet monte carlo


I dont have a wiring diagram but a lot of these were integrated with the hazard flasher/switch unit.

Sep 06, 2009 | 1995 Chevrolet Monte Carlo

1 Answer

2004 monte carlo. Turn signals dont work. The stalk still works with other functions, such as wiper, brights. The fuse is fine. Could it be a bad relay? When u push the stalk up or down nothing happens on...


try pressing the hazards on and off if they still don,t work replace the flasher unit. it is built into the hazard switch( all one unit ) change this and all will be good.

Aug 30, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

My hazards and brake lights work but my turn signals do not


ok my grandmother has a 1996 Monte Carlo and she had no brake lights and the turn signals barely worked! there is a part in the steering wheel that controls all of this and it cost about 220.oo dollars when it was all said and done cause you have to order the part from General Motors. Best of luck to you!!!!!!!

May 10, 2009 | 1996 Chevrolet Monte Carlo

1 Answer

1995 Chevy Monte Carlo


you need to take the upper and lower steering column covers off, should be 3 screws in bottom, take tilt steering lever out if neccessary, it is a 2 peice cover, take apart, change switch and put back together

Nov 03, 2008 | 1995 Chevrolet Monte Carlo

Not finding what you are looking for?
1995 Chevrolet Monte Carlo Logo

756 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...