Question about 1992 Ford Mustang

2 Answers

93 LX 5.0 Mustang, new fuel pump, rotor, and cap turns over well,

93 Fox body

Posted by on

  • 7 more comments 
  • bruce_agnew Apr 23, 2010

    fuel pump is brand new 43 lbs pressure

  • bruce_agnew Apr 23, 2010

    I apologize it will not start

  • bruce_agnew Apr 23, 2010

    the fuel pump continues to run with the key switched on have not replaced the ignition switch, do you know where it is located do not have an owners manual cut off switch is ok

  • bruce_agnew Apr 23, 2010

    there is no spark

  • bruce_agnew Apr 23, 2010

    changed out switch still will not start

  • bruce_agnew Apr 26, 2010

    do you know where the fuel pump relay is located on my 1993 mustang lx

  • yadayada
    yadayada May 11, 2010

    Is the new fuel pump running for 1 second when the key is switched on? have u had the ignition switch replaced under the Ford recall that covers a problem like this, this is the actual electrical switch not the key cylinder, they come apart, also has the fuel pump cut off switch been checked for being tripped and also for continuity through the switch? refer to the owners manual for its location...

  • yadayada
    yadayada May 11, 2010

    WHAT IS THE QUESTION THEN. NOT A MIND READER, SORRY, WILL NOT ASK AGAIN, PLEASE DESCRIBE THE PROBLEM.

  • yadayada
    yadayada May 11, 2010

    what about the pump?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have 1992 mustang 5.0. i was driving and it just died on me. i replaced fuel pump inside tank. new rotor cap and rotor. i heard the pump whining but not any more. ive been told to check the fuel pump relay switch...where is it. can some one help me

Posted on Mar 26, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,117 Answers

Do u have spark? also the switch may be the cause of that as well, the switch is located at the bottom of the steering column near the top of the column, here is a picture, it is very cheap to buy, the two halves of the switch separate and cause the loss of electrical to the car.

STANDARD MOTOR PRODUCTS Part # US98 Ignition starter switch
$12.09


93 LX 5.0 Mustang, new fuel pump, rotor, and cap t - 3a49ee2.jpg

Posted on Apr 23, 2010

  • 1 more comment 
  • yadayada
    yadayada Apr 23, 2010

    check the switch, see in the picture that the switch is two halves, the plastic upper and metal lower, see the metal tabs? they come apart there.

  • yadayada
    yadayada Apr 23, 2010

    was the switch separatred? have u run any trouble code tests? if not run a trouble code test with the instructions located at the link provided below, let me know what code u get, most likely you have a defective TFI ignition module and stator, also a troublsome recalled p[art in many models.

    http://www.troublecodes.net/Ford/

  • yadayada
    yadayada Apr 26, 2010

    under the hood on the inside of the fender, it is green

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had the engine and transmission taken out of my running and driving but rotted out 1992 Mustang lx 5.0 and put into the rust free body of a 93 Mustang gt body. The fuel pump will not stay running unless...


Here are some screenshots of the switch and install/replacement/adjustment procedure. NOTE: there are two recall notices from Ford to replace this switch. It can catch on fire! Recall Numbers are: 95S28 and 96V071000. Call Ford - see if they will replace it for you at no cost. Here's the data...
c40e3aa.gif
48d3981.gif

If you find this solution to be helpful, then please take a moment to rate this post. - Thanks.

Jun 21, 2010 | 1993 Ford Mustang

1 Answer

My mustang cranks with fuel on rag but wont start on its own i replaced fuel pump n checked fuces


Body Control Module (BCM) Inner fender well under the hood. Fontrols the fuel pump, cooling fan... I own a '93 fox body, been there, done that. Not a doubt in my mind.

Mar 01, 2010 | Ford Mustang Cars & Trucks

1 Answer

My mustang cranks with fuel on rag but wont start on its own i replaced fuel pump n checked fuces


The Body Control Module (BCM) on the inner front fender. Controls the fuel pump, Cooling fans... I have a '93 Fox Body. Been there done that.

Mar 01, 2010 | 1993 Ford Mustang

1 Answer

Won't start


check the ignition coil, power control module, fuel pump relay,fuel pressure, fuel pump and oil pressure switch.

Jan 23, 2009 | 1987 Volkswagen Scirocco

Not finding what you are looking for?
1992 Ford Mustang Logo

642 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...