Question about 1988 Chevrolet Monte Carlo

1 Answer

How to install 1988 chevy monte carlo rochester 4 barrel carburetor

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

You'll need to disconnect the fuel line at the front of the carburator. Disconnect the vacuum line at the back of the carburator going to the brake booster. Label and remove the vacuum hoses. Unplug the mixture control solenoid connector, the TPS connector and the connector to the automatic choke. Unbolt the 4 13mm bolts holding the carburator to the intake and remove the carburator.

Posted on May 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a pic and specs on a 1979 gmc sierra grande carburetor


That is a Rochester carburetor--4 barrel, and these carburetor are notorious for problems. It's a hassle to repair because some of the flat plug in the passage ways will leak. We just drill them out, and install new plug with epoxy after the carburetor body has been thoroughly cleaned. Go to you local library they should have a repair manual on Rochester carburetors, or look on the Internet it has everything in it networking. GB...stewbsion

Aug 21, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

My 1988 monte carlo hesitates on take off then clears up, what could it be?


The best place to start would be the throttle position sensor. If the vehicle has a carburetor than the next thing to check would be the accelerator pump. The sensor can be checked with a volt meter or a scope(even better). The pump can be checked by visual inspection.

May 12, 2011 | 1988 Chevrolet Monte Carlo

1 Answer

Car wont stay running, think its carb problem


If I understand correctly the car will idle but will not drive unless you pump the gas. If that's the case then you need to have it overhauled. There are blocked lines inside that are preventing it from working properly. Hope this helps.

Nov 24, 2009 | 1984 Chevrolet Monte Carlo

1 Answer

How do you remove the chrome trim from the bottom of a 1988 chevy monte carlo ls?


It is held on by adhesive. You will have to pry and pull off then take goo gone to the left over glue. it won't hurt your paint.

Oct 01, 2009 | 1988 Chevrolet Monte Carlo

1 Answer

Need to find a manual for a rochester carb 4 barrel e4mc electric choke for a 1987 monte carlo 305 engine


You should be able to find or order a Haynes manual, part # 10230, for Rochester carbs at you local auto parts store. If not then faxonautoliterature has the GM service manual for your car and it will have a section on rebuilding carbs. Hope this helps.

Sep 16, 2009 | 1987 Chevrolet Monte Carlo

Not finding what you are looking for?
1988 Chevrolet Monte Carlo Logo

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...