Question about 2007 Hyundai Tiburon

1 Answer

My car was serviced and shortly after the amber engine light came on.I had AHG take it back to the dealer whom said it was a brake light switch & claaimed to replace it free of charge,and 11 days later the same light came on.And this all happened in less than a week.It has only 18,200 kms on the clock as I dont speed around and or drive tha much,thats why the kms are so low for her year.After pickiing her up today April 23 2010 I was told that a sesor was now responsible and that if the lights came on again I will have to get the Fuel Injectors looked at,and only GOD knows what that will cost.The car was being over maintenanced by every six months & under the new car waranty I was able to have it serviced evry 12 months.The was no eror code number shown on the dsh,only a picture of the amber engine.Can the tools program parameters be adjusted to make the car shaow this symbol,every 11 days.I have looked on the net about this and a comment was made hat it is the timing belt.Can you please assist me very urgently.I use the car to get to hospitals and to doctors for my husband.I feel the car yard is lying to me and that they have done something to the car to make mony.I have a 2004 model with an Identicle engine and it has done 75,000 kms and has never had the engine light come on at all.The AHG guy that picked up the 2007 Tiburon Coupe Automatic was horrifying to me on arrival when he was to pick up the car,he refused to read & for me to put the details of my car and the fault reason to justify the AHG pick-up of the car on the pickup form, and said that if I even try to fill in the form details he would refuse to pick up my car and leave.He was so hatefull. I know there is something wrong with the car but I dont know what.Can I ask the mechanic for a list of all code error numbers to investigate this further. Kind Regards Margaret Ann Hayes

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

You can get a odb reader in any car parts store. cheapest ones start for like $30.
you can also go to a discount auto parts and borrow it from them to read your code. having the code, you can google it with your brand and model and you will sure find alternatives and solutions.

Posted on Apr 23, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have code p0573 saying brake switch A is high although brake lights are working ok, can anyone help please

Possible causes
- Faulty Brake Switch
- Brake Switch harness is open or shorted
- Brake Switch circuit poor electrical connection
help.jpg What does this mean? When is the code detected?
The P0573 codes is set when the stop light switch signal is too high.
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Stop light inoperative
- Cruise control system inoperative
P0573 Description
When the brake pedal is depressed, the stop light switch sends a signal to the Engine Control Module (ECM). When the ECM receives this signal, it cancels the cruise control.

Aug 29, 2014 | Cars & Trucks

3 Answers

Cruze control dosen't work

First does the light on the switch on the console light up? It's behind the gearshift, not on the dash or steering wheel. If not, check your fuse box then check the switch. If it lights up, then your cruise control is also connected through your brake light switch. I suggest renewing it before proceeding further. If it still doesn't work, there is a vacuum "T" on the passenger side of the throttle body, (US car that is), near your fuel rail and regulator. It feeds the regulator and the cruise control vacuum servo's in back of the front passenger side wheel well. Check this "T" for leaks. Make sure the vacuum servo (the big shiny chrome one on top of the throttle body, is connected. The error is probably electrical, not vacuum since it's bringing up a light on the dash.

May 23, 2014 | 1997 Jaguar XK8

1 Answer

Bmw e46 problems

May need a new oil pressure switch,it's located next to oil filter,remove electrical connector then part.You may have to remove oil filter to remove part.

Jan 06, 2014 | 2001 BMW 318i

2 Answers

Transmission code po703

P0703 Suzuki - Brake Switch Circuit Malfunction
Possible causes
- Faulty Brake Switch
- Misadjusted Brake Switch
- Brake Switch harness is open or shorted
- Brake Switch circuit poor electrical connection
Check if the stop light works with the brake pedal, if the brake lights are inoperative, replaced or adjust the brake switch.
- Engine Light ON (or Service Engine Soon Warning Light)
- Brake lights inoperative

Nov 21, 2013 | 2004 Suzuki Verona

2 Answers

2004 freelander v-6, auto, 2wd, 46400miles, on a 4 to 10 mile trip. The service engine soon light comes on, with hdc amber light with ! Comes on. The rpm jumps to 3700-3800 at 70 mph. It's as if you are...

If the hdc light is on check the wiring to the hdc switch on the gear lever and also check/clean/dismantle the brake switch on the pedal.
if you worry about vis motors see how to check them, monitor them and fix them here in this video

Sep 08, 2013 | 2004 Land Rover FreeLander

2 Answers

2000 Mazda 626 brake lights (all 3) not working.

I know the answer to this. I just fixed my in laws 1999 626 with your exact problem. Power comes through the brake switch, and into what they call a "joint box". Basically this joint box is the back side of your fuse box where all the connectors go. Most likely you have a bad box, or connection at the box. It is the only other thing between your brake switch and rear brake lights.

Jun 15, 2012 | 2000 Mazda 626

1 Answer

Code 571

The code is not complete it should be P0571
P0571 KIA - Brake Switch A Circuit
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Stop light inoperative
- Cruise control system inoperative Possible causes - Misadjusted brake switch
- Brake switch open or short circuit
- Poor brake switch electrical connection
- Failed brake switch

Jan 27, 2012 | 2006 Kia Sorento

1 Answer

No taillights, have brake lights

have u check that the wires wert pulled off when they pulled radio out look on top of brake pedal see if the wires r on switch

Jun 07, 2009 | 1995 Saturn Sl

1 Answer

ESP & ABS light comming on all the time

you should have the ESC/ABS module scanned for DTC's.

here are the 2 most likely causes.

1. low brake fluid
2. sticking/siezing brake lamp switch

at the dealership i see the brake lamp switches go bad left & right on a lot of the newer hyundai's. are your brake lights working?

May 07, 2009 | 2006 Hyundai Sonata

Not finding what you are looking for?
2007 Hyundai Tiburon Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides