Question about 2000 Honda Accord

1 Answer

How to replace front wheel bearings on a Honda Accord 2000?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Honda Master
  • 1,146 Answers

Hi:
Changing the front wheel bearings on your Honda Accord are a bit of work: You must remove both front hub assemblies, and that entails undoing the axle nut, the tie rod , the brake caliper, and the other attachpoints on the hub. Then the wheel bearing needs to be pressed out of the hub. I usually have a machine shop do this for me. This is just a basic overview of the process, but wanted to let you know what you are in for...hope this helps!

Posted on Apr 23, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 116 Answers

SOURCE: replacing front wheel bearings on a 1999 honda accord

there is a hub and a bearing assembly...usually you need to press the bearings into that hub...need a press to push out the old and press in the new...i replaced mine last year by going to the junkyard and taking out the hub and bearing assembly and just putting the whole thing into my car...much simpler..plus you learn how it goes together by taking it out in the boneyard..no press needed...plus if its genuine honda parts from a honda..(you can match the markings) its likely to be a very good part for a long time. Being used isn't always a bad thing as far as honda parts are concerned.This is from my own experience hope this helps you.

Posted on Mar 12, 2009

  • 17 Answers

SOURCE: How do you replace front wheel bearing 98 honda

Buy a Hayne's manual and read the instructions.

Posted on Aug 17, 2009

  • 14036 Answers

SOURCE: I need to know how to install a rear wheel bearing

its going to be hard to do at home you need a press to press out bearings and press them in

Posted on Apr 07, 2009

  • 1 Answer

SOURCE: replace font wheel bearing

how to change wheel bearing on a 2001 nissan altima

Posted on May 09, 2009

  • 449 Answers

SOURCE: I need to change right front wheel bearing on 96 honda accord

It's not a easy job you will need a press to take the old one out and replace the new one, my advice to you is take the steering knockle out and have your local shop press the bearing out for you and put the new one in. This way you just have to bolt everything back up and your good to go.

Posted on Oct 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace front wheel bearing 2009 Honda accord


Hello James.
I don't wish to insult you but replacing the front wheel bearing of a front wheel drive vehicle requires the sort of tool kit and skill level that if you need to ask how you do you do it you are unlikely to possess.

By the time a wheel bearing needs replacing it has been subjected to years of heat, cold and moisture and removing the bearing from the hub can be fraught with difficulties not covered by an average repair manual, difficulties which needs experience and equipment to overcome.
As if that isn't bad enough the work needed to clean and prepare the hub to accept the new bearing needs the realisation the assembly is a piece of precision equipment requiring very high standards if the replacement bearing is to have the best chance of returning a good life-span. This is also true of actually fitting the new bearing where if pressure isn't applied correctly it can be ruined in a second or have it's working life seriously shortened.

I suggest you ask an experienced someone else to fit the bearing this time while you observe.

Feb 08, 2015 | 2009 Honda Accord

1 Answer

The front end of my Honda Accord car wobbles at a certain speed


Ball joints and tie rods may even be a bad wheel bearing replace them in pairs

Mar 10, 2014 | 2003 Honda Accord

1 Answer

I have to replace the wheel-bearing front left on a Accord-coupe 1998. I need a step by step description how to do that. I'm locatet in germany.


look up on you tube 'ericthecarguy', he is an ex honda technician and has an excellent video on replacing wheel bearings. Not only is he more expert than me but his video is the best explanation that you could want

Sep 13, 2011 | 1998 Honda Accord

1 Answer

How do I replace the front wheel bearing?


take apart and take out new one in and put back together

Apr 13, 2010 | 2000 Honda Odyssey

1 Answer

I need to change right front wheel bearing on 96 honda accord


It's not a easy job you will need a press to take the old one out and replace the new one, my advice to you is take the steering knockle out and have your local shop press the bearing out for you and put the new one in. This way you just have to bolt everything back up and your good to go.

Oct 20, 2009 | 1996 Honda Accord

1 Answer

Right front wheel howls on 2000 Accord EX


are your front right brake pads worn more than your front left? if so probable cause is the rotor. if not, most likely wheel bearing

Oct 07, 2009 | 1996 Honda Accord

1 Answer

I need to know how to install a rear wheel bearing hub on a Honda 2000 Accord ex.


its going to be hard to do at home you need a press to press out bearings and press them in

Mar 28, 2009 | 2000 Honda Accord

1 Answer

Replacing front wheel bearings on a 1999 honda accord


there is a hub and a bearing assembly...usually you need to press the bearings into that hub...need a press to push out the old and press in the new...i replaced mine last year by going to the junkyard and taking out the hub and bearing assembly and just putting the whole thing into my car...much simpler..plus you learn how it goes together by taking it out in the boneyard..no press needed...plus if its genuine honda parts from a honda..(you can match the markings) its likely to be a very good part for a long time. Being used isn't always a bad thing as far as honda parts are concerned.This is from my own experience hope this helps you.

Mar 12, 2009 | 1999 Honda Accord

1 Answer

Replacing the front wheel bearings of a Honda Accord 1993 SE


yes you need a press to remove the bearing and hub , you can use the same hub as long as where the hub goes into the bearing is not scored in any way . the knuckle would have to be taken off and sent to a machine shop if you done have a press. and you should also use caution when putting the nut back on thr axle.

Feb 11, 2009 | 1993 Honda Accord

1 Answer

Replace front wheel bearings


Front wheel bearing on a Honda Accord are a press in unit. It is a project that is not for the faint of heart.

Aug 07, 2008 | 1996 Honda Accord

Not finding what you are looking for?
2000 Honda Accord Logo

909 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...