Question about 1998 Chrysler Town & Country

1 Answer

Miss firing all spark plugs and wires have been replaced.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

I would check the order the leads go from the distributor to the spark plugs as 1 or 2 of these might be incorrectly placed on the wrong spark plugs causing the mis-firing.

Posted on Apr 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Miss fire at cylinder 6 on my 2004 grand am 3.4 i have replaced new plug new coil and wire whats next still miss fires


With the engine running and the cylinder misfiring tap (key word is tap) the injector with a screwdriver a couple of times. If the misfire goes away replace the injector.

Nov 29, 2012 | Cars & Trucks

1 Answer

Fouled plugs in #2 and #8 . Changed all plugs and still have a miss and the smell of raw fuel


ignition wires is agood start , check all wires for spark out put with spark tester saves a lot of time.

Oct 29, 2012 | 1997 Chevrolet Tahoe

2 Answers

Cyl. 3 miss fire code po303


my money would be on the coil cover, especially if it had been a long time since the last tune up. it is certainly worth trying, as this is part of a routine tune up anyways. good luck!

Mar 18, 2010 | 1999 Pontiac Sunfire

2 Answers

Missing after replacing spark plugs


What size engine? Check the gap on the plugs as well. "pregapped" is not always right

Feb 18, 2010 | 1991 Oldsmobile Cutlass Ciera

2 Answers

Code po304 #4 cylinder mis fire


ck if you have spark at the coil for that cylinder. check the plug wire closely. if it has spark at the coil, then replace all the spark plug wires.

Oct 12, 2009 | 2000 Cadillac DeVille

2 Answers

'83 Monte Carlo - Miss fire at idle/accel./driving


You can have car put on scope and it wll show any irregularities in the ignition system. It can also be dowithout any equipment. First, loosing ALL 8 spark plug wires, Now place the spark plug wires loosly back on, just secure enough to secure. You might need 2 people. Being the miss is more consistant in gear, APPLY THE EMERGENCY BRAKE , put trans into drive and raise rpm's till miss is obvious. Remove ONE plug wire at a time, TILL THERE IS NO DIFFERENCE IN MISS. Thats the cylinder missing. Start with the spark plug, inspect, work back to wires and cap. An EXTREME result will be NO COMPRESSION.

Apr 02, 2009 | 1983 Chevrolet Monte Carlo

1 Answer

Ford f250 has a miss firing at idle and when speeds reach 40 -60


Did you replace the dist cap? check also for vacum leak

Mar 15, 2009 | 1999 Ford F250 Regular Cab

1 Answer

I have a 97 plymouth voyager van that dies out while going down the road we have replaced that converter, plugs wires cap rotar and it is now saying multi mis fires is it a bad o2 sensor


well you might have"bad ign wires" or bad ign coil!!!!O2 sensor wouldn't do that usually miss fires is wire ,coil, broken or crack porcelain on spark plug usually done on installing them!!!!!! I know the three spark plugs closest to fire wall are not easy to get at and some time spark plugs get cracked and over looked good luck

Dec 22, 2008 | 1997 Plymouth Voyager

1 Answer

Miss firing


could be a wire crossed, or it's out of time. since you used motorcraft plugs, did you set them properly to the correct gap? replacing plugs without gapping them can cause the sluggishness, out of time can cause the mis-fires and rough running.

Nov 27, 2008 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
1998 Chrysler Town & Country Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...