Question about 2003 Oldsmobile Alero

1 Answer

How do you put on a motor mount on a 2003 alero

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do I remove a broken motor mount on a 2003 oldsmobile alero so I can replace it with a new one

Posted on Oct 08, 2012

2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 416 Answers

SOURCE: What type of motor oil do I put in my 2003 Oldsmobile Alero the

There is no V8 Oldsmobile Alero 2003 and 2007 Olds Alero
for V6 Olds Alero 2003
Valvoline / 1 gal. SAE 10W-30 All Climate Motor Oil
Pennzoil / 1 gal. SAE 10W-30 Advanced Protection Motor Oil
Any Brand Syntetic Motor Oil SAE 10W-30
The same for 4 cylinder
Good Luck

Posted on Jan 14, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Trying to put belt on but motor mount is in the why are threre away round it.

you have got a fun one, if you look at the bottom right corner of the motor mount you will see a long spacer were the motor mount bolt attaches the mount to the engine, you will need to remove the nut and stud and then the spacer will come out then you can replace the belt......good luck

May 14, 2011 | 2000 Oldsmobile Alero

1 Answer

How do i replace a knock sensor?

there is two places were might be the knocking sensor mount , one might be over the main axle motor near the long belt at the front face of engine second might be when the engine and shift boxes been mount over the starter zone , but the problem you have show might be the valve or the knocking axle

May 23, 2010 | 2003 Oldsmobile Alero

1 Answer

2003 Alero, heater blower only works on the two highest position?

The blower motor is located on the passenger side of the vehicle next to the blower motor. Run the fan on high and listen for the blower motor location if in question. The resistor will be mounted into the heater case and held in by two screws.
Good Luck

Mar 12, 2010 | 2003 Oldsmobile Alero

2 Answers

My engine is jumping when i put my car in drive?

if you mean that it feels like the engine lifts up and slams down again, check the motor mounts for at least 1 to be broken.

Mar 10, 2010 | 1999 Oldsmobile Alero

1 Answer

Plastic clips for 2003 olds alero passenger side broke. nothing wrong with motor. i need the clips not the whole regulator assembly.

I do not expect you can get it from your dealer. They will probably seel it included with a complete assembly.
So should do scrap yard unless they have a bad assembly mounted on an accidented car and allow you to get the needed piece/part removed by yourself (if they are open to)
Good luck

Dec 27, 2009 | 2000 Oldsmobile Alero

1 Answer

2003 Alero passenger window

I would be very suspicious of the drivers master swich. If the window works fine on the other side it's an easy assumption that the window motor and regulator are operative. The switches are usually fairly inexpensive (less then 100.00 ) and easy to install

Nov 06, 2008 | 2003 Oldsmobile Alero

Not finding what you are looking for?
2003 Oldsmobile Alero Logo

Related Topics:

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides