Question about 1996 Nissan Pathfinder

1 Answer

I am getting the error code po745 on my 1996 nissian pathfinder.the code is a pressure control sensor.What is a pressure control sensor where is it located and what is involved in replacing it.How much will this sensor cost

Posted by on

  • rocky456 Apr 26, 2010

    I phoned a transmission shop and they sell the solenoid in a cluster with 4 others.It costs about $225.00 for the cluster and they have to drop the pan and the valve body to install it.They also said it could be just a broken wire to the sensor.If they have to drop the pan they recomend changing the oil flushing the torque converter and installing a new filter and pan gasket.The vechile has 195,000 kms on it so that is proably due anyhow.We just bought it from a chrysler dealer in Lacombe alberta so I imagine they knew there was a problem when they sold it to us.I'm expecting it will cost us at least $600- $800 by the time its all said and done.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 14,036 Answers

PRESSURE CONTROL SOLENOID PART OF TRANSMISSION THAT CONTROL TRANSMISSION FLUID PRESSURE.YOU NEED TO GO ON LINE TO BUY EXACT TRANSMISSION MANUAL TO YOUR NISSAN.BECAUSE THERE ARE MANY SHIFT SOLENOIDS YOU NEED TO LOCATE THE RIGHT ONE BEFORE YOU CAN FIX IT.GO ON LINE LOOK UP CHILTON TRANSMISSIONS REPAIR MANUALS. THEY SALE ALL KINDS OF MANUALS.BUT YOU NEED TO KNOW WHAT TYPE OF TRANSMISSION IN YOUR VECHICLE.

Posted on Apr 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the purge control valve located on 1998 nissian pathfinder


Location should be back by the fuel tank.

first off, the P1447 DTC is triggered when the EVAP control system isn't operating properly or there is a leak between the intake manifold and the pressure sensor. the parts between the pressure sensor and intake manifold are:

1. EVAP canister purge control solenoid valve
2. EVAP canister purge control valve
3. EVAP canister purge volume control valve (Part # 14930-3M201) YOU WILL HAVE TO DOUBLE CHECK ON THE PART NUMBER WITH THE DEALER FOR THE PRICE.

If you've received this P1447 DTC, chances are that the brick of charcoal in the canister has fallen apart over time, and filled the lines with charcoal. this affects parts 2 & 3 from the above list, and of course the EVAP canister (Part # 14950-1s717 $144.22). but when you replace the canister, you have to replace the EVAP canister vent control valve (part # 14935-54u06 about $100), and don't forget the o-ring (part # 16618-40u00 about $1.60) that goes between the canister and the vent control valve.

If you attack this DTC early enough, all you have to replace is the canister and vent control valve with the o-ring, which will add up to under $300 MSRP...a lot better than paying upwards of $1000 for parts and labor. Don't be scared to do it, it's actually quite simple.

D

Sep 28, 2015 | Cars & Trucks

1 Answer

MOTOR CUTS OFF NISSIAN PATHFINDER


Petrol or diesel? Manual or auto trans? How and when does it cut off? Please get back to us if you have solved your problem as it may help others, thanks.

Jul 15, 2014 | 2003 Nissan Pathfinder

1 Answer

I just got my car scanned and a few codes pop up


Error Code: P0130
Fault:
Oxygen Sensor (O2S) 1, Bank 1 - Circuit Malfunction
Possible Cause:
Malfunction Indicator Lamp (MIL) Triggered on first occurrence.
-Wiring harness.
-Oxygen sensor (O2S).
-Engine control module (ECM).

Error Code: P0505
Fault:
Idle Speed Control (ISC) System - Malfunction
Possible Cause:
-Wiring harness.
-Idle speed control (ISC) actuator/Idle air control valve (IAC) valve.
-Throttle motor.
-Throttle valve tight/sticking.
-Engine control module (ECM).

Error Code: P0100
Fault Location:
-Mass Air Flow (MAF) Sensor/Volume Air Flow (VAF) Sensor - Circuit --Malfunction
Possible Cause:
-Wiring harness.
-Mass air flow (MAF) sensor.
-Volume air flow (VAF) sensor.
-Engine control module (ECM).

Error Code: P1491
Fault:
Exhaust Gas Recirculation (EGR) Valve Insufficient Lift
Possible Cause:
-Wiring harness.
-EGR Valve.
-ECM

Error Code:P1607
Fault:
-Engine Control Module (ECM)/Powertrain Control Module (PCM)

Error Code: P0966
Location:
-Pressure Control (PC) Solenoid B - Circuit Low
Possible Cause:
-Wiring short to earth.
-Pressure control (PC) solenoid.
-Engine control module (ECM)/Powertrain control module -(PCM)/Transmission control module (TCM) .


Apr 30, 2013 | 2004 Honda Civic

2 Answers

I have a code P1447 Evap purge flow monitor on my 97 Pathfinder. What is and how do I correct this issue?


P1447 - Evaporative Emission (EVAP) Control System, Purge Flow Monitor
In this evaporative emission (EVAP) control system, purge flow occurs during non-closed throttle conditions. Purge volume is related to air intake volume. Under normal purge conditions (non-closed throttle), the EVAP canister purge volume control solenoid valve is open to admit purge flow. Purge flow exposes the EVAP control system pressure sensor to intake manifold vacuum.

Under normal conditions (non-closed throttle), sensor output voltage indicates if pressure drop and purge flow are adequate. If not, a fault is determined. Malfunction is detected when EVAP control system does not operate properly, EVAP control system has a leak between intake manifold and EVAP control system pressure sensor.

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)

Possible causes
* EVAP canister purge volume control solenoid valve stuck closed
* EVAP control system pressure sensor and the circuit
* Loose, disconnected or improper connection of rubber tube
* Blocked rubber tube
* Cracked EVAP canister
* EVAP canister purge volume control solenoid valve circuit
* Closed throttle position switch
* Blocked purge port
* Closed throttle position switch


Test is and send us your updated.

Jan 14, 2011 | 1998 Nissan Pathfinder

1 Answer

How much does it cost to replace a cam sensor ?


The part its self is cheap, under $50 going to a shop to get it fix is where your going pay out. most i heard was bout $150

Feb 19, 2010 | 1997 Nissan Pathfinder

1 Answer

I have a 2007 nissian pathfinder 4wd an the tire valve stem broke off that has the sensor on it for low air pressure.how do i reset the computer after i replace the sensor


Normally the sensor will reset after a few miles of driving. If it doesn't, most reputable tire shops (probably including the one that is putting in the new valve stem) can reset the computer for a fee.

Jan 27, 2010 | 2007 Nissan Pathfinder Off Road

1 Answer

Where can I get an ignition key code for a 1997 Nissian Pathfinder? Local dealer key codes go to 1998.


Without changing all the lock cylinders the cheapest easiest way would be to call a local locksmith to cut a new key. Generally $60-$80 and no need to remove the lock cylinder.

Oct 01, 2009 | 1997 Nissan Pathfinder

1 Answer

2005 gas gauge/needle


They Wont till A CERTAIN Number of Complaints are Filed, Till then this is the FUEL PUMP / SENDING UNIT that is Bad and they are EXPENSIVE

Aug 12, 2009 | 2005 Nissan Pathfinder

1 Answer

I just tried to replace the front rotors on my 1996 nissian pathfinder, but couldn't figure out how to remove the wheel bearing (or is it the hub?). What do I have to do get the rotor off?


- disconnect ABS sensor and move away to protect from damage
- remove brake caliper assy.
- remove hub cap
- remove snap ring w/tool
- remove lock washer
- remove wheel bearing lock nut (tool J36001)
- pull off wheel hub & wheel bearing (do not drop it!)
- rotor is attached to hub.

Apr 28, 2009 | 1996 Nissan Pathfinder

Not finding what you are looking for?
1996 Nissan Pathfinder Logo

711 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...