Question about 1993 Volkswagen Jetta

1 Answer

Replace oil pump on a 1993 jetta celebration 3

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 271 Answers

The oil pump is located into a sump.Loose all the screws around the sump but the first drain the oil.You need also new sump gasket.

Posted on Apr 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed oil sending switch on 1989 celebrity cl wagon 2.8 mpfi now no power to fuel pump relay is good new pump.mayby wrong switch?


These switches all look the same. The difference is how many pins they have in them. They can have 1 to 4 pins on the switch. If yours had 3 pins and they gave you one with 1 pin, theres a problem.

Oct 25, 2014 | 1989 Chevrolet Celebrity

1 Answer

Oil in coolant already tried oil cooler seals and gaskets on 93 jetta


cylinder head cracked or block cracked...get a coolent pressure tester.. pump it up to 16 lbs watch for pressure to drop.

Dec 06, 2012 | 1993 Volkswagen Jetta

1 Answer

Injector not working why put new injector new computer new fuel pump does it have injector relay 1987 celebrity


Check fuel pressure. Have you replaced the fuel filter on schedule? Verify that the fuel pump is getting power. Power goes through an in-line fuse, then the fuel pump relay or the oil pressure sensor. (The relay bypasses the oil pressure sensor while the engine starts, but fuel pump power goes through the sensor during normal run operation. If you lose oil pressure, the fuel pump is shut off to protect the engine.) On four-cylinder models, the fuse is in the fuse block (E PUMP 10)
The fuel injectors are connected to the ECM fuse on one side and straight to the engine computer on the other side. Check the connectors and wiring, especially at the injector.

Aug 26, 2011 | 1987 Chevrolet Celebrity

1 Answer

Red oil light on put oil in and it is still flashing


The most probable cause would be a faulty oil pump. If the oil level is full, and the light continues to flash, then the cause would be an oil pump issue.

Jul 10, 2010 | 1993 Volkswagen Jetta

1 Answer

1988 chevy celebrity No fuel to the carberator.


without starting the engine position the key to the on position.
you can hear the fuel pump operationing for 4 to 6 seconds upon having the key on.
if not heard running check the fuel pump fuse, the fuel pump relay, and the engines oil pressure switch.
they all work the pump you see
the engine oil pressure switch runs the pump untill the engine reaches normal pressure
once the pressure is reached to the normal range the computer shuts that circuit off and turns the fuel pump relay on

May 22, 2010 | 1988 Chevrolet Celebrity

1 Answer

How to replace a oil pump on a 1995 vw jetta


you need to remove the engine sump, the pump is inside driven by a small chain

Apr 24, 2010 | 1995 Volkswagen Jetta

2 Answers

Oil light/warning sound on Jetta after changing oil pressure sending unit switch


my 95 vw jetta oil light is on and there is a beeping sound what might be wrong

May 27, 2009 | 1996 Volkswagen Jetta

1 Answer

1986 jetta oil pump location and replacement/knock sensor


oil pump is in the oil pan and if you have no or low oil pressure replace pump before doing anything with knock sensor. knock sensor is more or less a microphone and listens for spark knock but will set codes for any knocking or tapping noise which is commonly heard if oil pump is malfunctioning

Mar 20, 2009 | 1986 Volkswagen Jetta

Not finding what you are looking for?
1993 Volkswagen Jetta Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...