Question about 2005 GMC Yukon
It does that to tell you that your traction control senses slip on one of the wheels and is transferring some of the spin to the other wheel(s). What it basically means is that driving conditions are not optimal so if you see that message, be ready for some sort of weirdness while steering.
Posted on Apr 23, 2010
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
If the system fails to turn on or activate, the StabiliTrak®
light along with one of the following messages will be
displayed on the Driver Information Center (DIC):
TRACTION CONTROL OFF, SERVICE TRACTION
CONTROL, SERVICE STABILITRAK. If you see these
conditions, turn the vehicle off, wait 15 seconds, and then
turn it back on again to reset the system. If any of these
messages still appear on the Driver Information Center
(DIC), your vehicle should be taken in for service.
Jun 23, 2015 | 2008 Buick Enclave
Apr 22, 2015 | 2005 Chevrolet Impala
The ability of the control modules to communicate through the serial data circuit
The identification of any stored diagnostic trouble codes (DTCs) and their status
The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.
The traction control switch is a input to the body control module, with a scan tool hooked up an looking at BCM data ,check for conformation the traction control switch is turning on an off !
SERVICE TRACTION SYSTEM The IPC illuminates the SERVICE TRACTION SYSTEM indicator in the message center when the electronic brake control module (EBCM) detects a malfunction in the traction control system. The IPC receives a class 2 message from the EBCM requesting illumination. The SERVICE TRACTION SYSTEM indicator illuminates for 60 seconds when the condition is present. The IPC sends a class 2 message to the radio in order to activate an audible warning.
TRAC OFF The IPC illuminates the TRAC OFF indicator when the following occurs:
The electronic brake control module (EBCM) inhibits the traction control system due to a malfunction in the traction control system. The IPC receives a class 2 message from the EBCM requesting illumination.
The body control module (BCM) detects that the traction control switch has been pressed (signal circuit is low). The BCM sends a class 2 message to the EBCM in order to disable traction control. The IPC receives a class 2 message from the EBCM requesting illumination. The BCM sends a class 2 message to the radio in order to activate an audible warning.
Feb 25, 2015 | 2003 Chevrolet Impala
The body control module (BCM) detects that the traction control switch has been pressed (signal circuit is low). The BCM sends a serial data message to the EBCM in order to disable traction control. The IPC receives a serial data message from the BCM requesting illumination. The BCM sends a serial data message to the radio in order to activate an audible warning.
you need to have the ( EBCM ) electronic brake control module checked fro codes !
Jan 07, 2015 | 2009 Chevrolet Chevrolet Cobalt LT
Nov 06, 2013 | 2004 Chevrolet Tahoe
Jul 06, 2012 | Cars & Trucks
Apr 13, 2011 | 2005 Chevrolet Impala
May 14, 2010 | 2002 Chevrolet Impala
Jan 18, 2018 | 1994 Cadillac DeVille
Jul 27, 2009 | 2003 Chevrolet Impala
361 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: