Question about 1989 Dodge Daytona

2 Answers

My lights work but they wont flip up. was sitting for a bit so they never got used. they used to work but not now.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

Depending on your model and make, it is possible that your light's air pump is no longer functioning. The lights on most popup light cars raise by pneumatic pressure, and while some lights use pressure from other airpumps, others may have their own.

It is possible that the air hose is damaged, crimped, or otherwise nonfunctional, and it is also possible that the pump itself is damaged.

Check the hoses first. They are the cheapest part, and in almost every condition, a long-sitting cars hoses will dry-rot to the point of being no longer useable.

Posted on Apr 23, 2010

Testimonial: "*it isnt air that lifts them im pretty sure its a motor. might have siezed?"

  • Tristan Noel Apr 23, 2010

    In most cases, to ensure that both sides raise evenly without stutter or excessive power use, they'll use an air pump. Check for pneumatic bars and hoses to confirm this.


×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a totally original dodge daytona 1989 es. my headlights worked but would not flip up. i replaced the fuse. its the same fuse for the cigarette lighter. put a new yellow fuse in and the lights work totally fine now. if not then the motor is most likely shot. becasue there is no air mechanism involved in this model car.

Posted on Aug 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Toyota Camry 2007 A/C wont work the freon is


To check for leak in evaporator,charge the system fully,with green neon dye,and use the glasses made for that.Let the ac run a good bit ,and condensation is leaking from the evaporator case,and look for the dye in the condensation.

Oct 05, 2013 | 2007 Toyota Camry

1 Answer

Head light wont turn off


Try flipping off the switch again, turning off lights when not in use can save you a lot in energy costs!



------------------obd2express.co.uk
http://www.obd2express.co.uk/wholesale/cat-caterpillar-et-wireless-diagnostic-adapter-with-bluetooth.html

Nov 22, 2012 | 2004 Toyota Camry

1 Answer

05 ford five hundred wont turn over thinking its the fuel pump or maybe the relay


try banging on the fuel tank sometimes that could make the fuel pump work for a bit, you cant 100 percent rule out a bad fuel pump;you may have a better idea if it starts. good luck

Jul 22, 2012 | Ford Five Hundred Cars & Trucks

1 Answer

Chevy blazer wont start after sitting for a while


weak alternator not charging the battery fully or an elictrical item in your vehicle using the power , like a light or radio etc

Dec 02, 2011 | 1996 Chevrolet Blazer

1 Answer

I have just purchased an E270 04reg and it wont start. the lights come on when you put the key in but wont start at all. An AA mechanic came out to see it but couldnt figure anything out. Is there anyone...


If you turn on your headlight do the light up good? Has it been sitting a little bit?
It sounds like your starter may be sticking.

Don't smash your starter but give it a little tap then try to turn it over.

sometimes when vehicles sit the starter will stick on you.

Sep 23, 2011 | 2004 Mercedes-Benz Mercedes Benz E Class

1 Answer

I have a 86 chevy caprice haveing trouble with my lights when i flip the switch all lights work for 4 min then shut off turn car off and let sit for awhile then they work again tried switch same result i...


you have a relay that is bad. the relays are inter changeable on the chevy. pull one out of another loc. and put it in the lights loc. and if it corrects it then just buyt a new relay

Aug 12, 2011 | 1986 Chevrolet Chevy

1 Answer

My waser fluid dispenser wont work on my -98 ford explorer there'


it sound like wither the motor for the fluid is broken (rare) or that the hose bits have clogged up with something. (likely especially if you have polished your car recently or it has built up over time)

Firstly you will need to remove the fluid direction bits (they sit on the hood of the car). To get these out open your hood and disconnect the fluid lines going into them.

They are most likely attached to the hood viua some pressure clips on the side. Squeeze on either side of the clips and push up and they should come loose.

Once out you can do two things.

Get a sewing needle or a pin and push it into the two holes that shoot out the water. Scrap the pin around to make sure you clear the biggest passage possible. Flip the directional dispenser over in your hands and stick the pin into the single nib at the bottom (that the fluid line connects to). Once again scrap it around and try to dislodge any dirt or gunk that is in there.

Next put your mouth over the two holes and blow as hard as you can. If it is blocked up of doesn;t give you will need to stick the pin in again.

There should be a popping sounds when the air finally gets througha nd some dirt, grime, polish, gunk should come out. Give them a really good clean and blow.

If it clears up and you can breath through the holes place them back into your car and try to push through the water again.

It make take a few go's to get it cleaned up. Alternatively go to the local auto store and buy some for your car should be about $10 each (if they have aftermarket ones).

Also if you have an air compressor let that loose on the holes (works a treat for me)

If all this fails it could be the motor for the fluid (this usually sits underneath or near the water reservoir) If so you should be able to get a replacement part pretty cheaply and it is pretty easy to install..

Good luck...

Feb 23, 2010 | 1998 Ford Explorer

2 Answers

WONT SHIFT WHEN COLD


The seals in the transmission In the clutch apply are hardened or have flipped over and cracked. A rebuild wil fix this.

Jan 23, 2009 | 1994 Buick Park Avenue

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...