Question about 2007 Acura TSX

1 Answer

How to replace interior dome light?

Right interior dome light is out. How does one replace it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 38 Answers

Pop the cover off with a flat head screwdriver, remove bulb and install new one . carefull not to touch the new bulb.

Posted on Apr 23, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 958 Answers

SOURCE: 2007 chrysler town and country interior dome lights

if it is covered by a white plastic then inspect it carefully and look for slots where you can put tiny screwdrivers to pry the plastics off, then you can replace your bulb. just be careful not to break the plastic.

tnx 4 using fixya,

drcool

Posted on Sep 14, 2008

  • 1861 Answers

SOURCE: 1998 toyota camry interior dome light replacement

Look closely at the cover. You will see a small slot. Insert a small flat blade screwdriver, and pry it off. Very easy..

Posted on Nov 10, 2008

  • 106 Answers

SOURCE: the interior dome light problem

Door switches. They are mounted in the door I believe. Try spraying wd40 in the door latch.

Posted on Jun 09, 2009

philschneide
  • 448 Answers

SOURCE: The interior dome light is burned out, removing cover problem.

You will have to pry off the lens CAREFULLY using a small screwdriver. There are two little plastic protrusions on each long side of the lens which fit into the casement. You can ease the casement away from the lens enough to get it to pop out. Re-inserting it is the same, but probably easier.
Gently, give it a try.
Hope this helps you.

Posted on Oct 23, 2009

philschneide
  • 448 Answers

SOURCE: Interior dome/map light replacement - 2008 Honda C-RV

You will have to pry off the lens CAREFULLY using a small screwdriver. There are two (or more) little plastic protrusions on each long side of the lens which fit into the casement. Look for very small slots along the side of the lens to insert the blade of the screwdriver. You can ease the casement away from the lens enough to get it to pop out. Re-inserting it is the same, but probably easier.
Gently, give it a try.
Hope this helps you.

Posted on Nov 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior lights won't shut off


Some vehicles have a twist dashlight control and when it is turned to the extreme position it turns on the interior lights. Other vehicles have a separate switch for interior lights right on the dome light. Yet another type is a dome light with 3 selections that command the dome light to be on fulltime, or to be off fulltime, or the normal door opening triggering the switch.

Provided the problem is not any of the above, you could have a bad doorjam pin switch which is not separating its contacts when the door is closed. I would look at the drivers switch first as it has the most use.

Dec 10, 2013 | 2000 Ford Expedition

1 Answer

Dome/interior lights on my 1991 Dodge Grand Caravan come on in Dimmer Position for Dash Lights


Replace the switch The age of your vehicle warrants the switch replacement

May 29, 2017 | 1991 Dodge Grand Caravan

2 Answers

1999 Chev Silverado Door Light Switch


the actuator for the dome light is actually located inside the lock mechanism. Have you checked to make sure the dome light override button is in the out position?

Jul 17, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

2005 chevy suburban- my back-up lights and interior dome lights do not work. All fuses appear intact? Suggestions?


you bcm (body control module is bad) to have the dealer replace it will run you about $400. a quick fix for the reverse light is to splice 2 wires into the wire for the center plug in your trailer wiring. now run a wire up to each reverse light, cut the green wire to each reverse light and **** conect them up. this is a seperate revers feed than the one from the bcm. the dome lights remove the light cover on the second set of interior lights (the one between the drivers seats). the two side bulbs are map lights the center bulb is for the dome lights. run a jumper wire from the right or leftside socket to the center socket. you dome lights will now turn on with just the use of that switch i replaced the back bulbs with led's soo there is no extra amp's being drawn. you could bypass the bcm but i could not find any wiring diagrams for it and i dont know if it can take the added amp's

May 31, 2010 | 2005 Chevrolet Suburban

1 Answer

1991 Dodge Dynasty interior dome lights won't shut off


First, check the dimmer switch (should be the same as the headlight switch) and make sure it is not turned all the way to the right as that will turn on the overhead light.
If you are sure the door switch is fine, then I would replace the dimmer switch.

May 14, 2009 | 1991 Dodge Dynasty

1 Answer

How do I replace the interior dome light?


the cover just pops off use a screw driver to pry it off.

May 11, 2009 | 2000 Ford Focus

1 Answer

Interior Dome light will not go out


The problem was in the dome light itself. It is being replaced. The problem could have been caused by my son tucking and stapling a detached headliner around the dome light resulting in a ground problem that also shorted out other electrical systems. The exact cause is unknown.

Apr 14, 2009 | 1998 Jeep Cherokee

1 Answer

Interior dome light stays on while driving


Your dome light switch in in front of the driver's seat where the headlights are. It is possible that switch is bad as it should be both a turn knob switch, and by pulling on it, it becomes a head light switch. You may have to replace it.

Dec 21, 2008 | 2006 Ford Mustang

1 Answer

1998 toyota camry interior dome light replacement


Look closely at the cover. You will see a small slot. Insert a small flat blade screwdriver, and pry it off. Very easy..

Nov 09, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
2007 Acura TSX Logo

870 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...