Question about 2000 Hyundai Elantra

1 Answer

How to recode central locking with a remote

I recently brought a second hand remote to a 2000 lantra
how do i recode it to the car

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 154 Answers

Most of them you point at car hold down lock and unlock at the same time.

Posted on Apr 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Back doors locked shut. how do i open them.central locking innoperative


Use the key fob to open the rear doors by pressing the unlock function twice. If you need reprogramming instructions, use the following:

2002 Focus

  1. Turn the ignition from OFF to RUN 4 times within 6 seconds.
  2. Turn the ignition OFF. The system will chime to confirm programming mode.
  3. Within 20 seconds, press any button on first keyless remote. The system will chime once to confirm programming.
  4. Within 20 seconds, press any button on second keyless remote. System will chime once to confirm programming.
  5. Turn ignition to RUN to exit programming mode.

Mar 29, 2014 | 2000 Ford Focus

1 Answer

Central locking system


check central locking system fuse it controls all door locks and other acessories.need go to dealership buy remote keys..

Mar 28, 2013 | 2000 Volvo S80

1 Answer

Hyundai Accent 1.4L GLS 2000 Central Locking not working


FOR Central locking not working on 2000 Hyundai accent?Click the link below :-----

http://schematicsdiagram.blogspot.in/2012/03/this-is-how-system-operates.html

This will help.

Thanks.

Mar 01, 2012 | 2000 Hyundai Accent

1 Answer

Acura RL 2000 Remote needs Program Instructions


TURN ON IGNITION SWITCH WITH ENGINE OFF.POINT THE REMOTE TRANSMITTER AT CENTRAL LOCKING SIGNAL CONTROL MODULE LOCATED BEHIND PASSENGERS SIDE C POST.WITHIN 4 SECONDS PRESS LOCK OR UNLOCK.WITH REMOTE TRANSMITTER.WITHIN 4 SECONDS SWITCH IGNITION OFF.WITHIN 4 SECONDS SWITCH ON IGNITION WITH ENGINE OFF.WITHIN 4 SECONDS PRESS LOCK OR UNLOCK USING REMOTE TRANSMITTER.WITHIN 4 SECONDS SWITCH OFF IGNITION SWITCH.REMOVES KEYS FROM IGNITION SWITCH WAIT 10 SECONDS THEN TRY USING REMOTE TO SEE IF IT WORKS DOOR LOCKS.IF THIS PROCEDURE DONT WORK.TAKE TO DEALERSHIP.

Jun 22, 2010 | 2000 Acura 3.5RL

1 Answer

VW Sharan (2000model) - Recoding Keys


Programming
When
Key buttons operated repeatedly while vehicle out of range and system becomes inoperative. Key added or replaced. System malfunction.
How
Obtain all keys fitted with remote control. Close all windows and doors. Insert key into driver's door lock. Turn key to unlock position 3 times. Remove key.
NOTE: Hold key in unlocked position for 0,5 second.
Programming mode activated (driver's door LED illuminated). Carry out the following within 20 seconds: Point key at infrared receiver. Located near rear view mirror. Press and hold lock button within 5 seconds Fig. 1 [1]. Press unlock button 3 times Fig. 1 [2]. Release lock button Fig. 1 [1]. Correct programming indicated by driver's door LED flashing. Repeat above procedure within 15 seconds to program remaining keys. To exit programming mode and extinguish LED: Wait 15 seconds.
NOTE: A maximum of 4 keys can be programmed.

Feb 04, 2010 | 2000 Volkswagen Jetta TDI

1 Answer

How to recode remote to vahicle


Programming
When
Remote control added or replaced. System malfunction.
How
Obtain all remote controls. A maximum of 3 remote controls can be programmed. Switch ignition ON. Repeat procedure below 3 times: Within 4 seconds: Press lock or unlock button. Within 4 seconds: Switch ignition OFF. Within 4 seconds: Switch ignition ON. Within 4 seconds: Press lock or unlock button. System should now lock or unlock vehicle. Within 4 seconds: Press lock or unlock button. Within 10 seconds: Press lock or unlock button of first remote control. System should now lock or unlock vehicle. Press lock or unlock button of second remote control. System should now lock or unlock vehicle. Press lock or unlock button of third remote control. System should now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed remote controls.
NOTE: If less than 3 remote controls are to be programmed, remove ignition key after programming last remote control.

Jan 18, 2010 | 2003 Honda Civic

1 Answer

Neither of my keys unlock my car anymore, wondering why this is? it can't be that both batteries in the keys have died.


if its the remote plips you mean, then the car may need recoded to the plips if the car battery has been disconnected or changed recently.

Otherwise the keyblades should still open the doors, or the central locking controller is faulty.

Oct 24, 2009 | 2001 Toyota Celica

1 Answer

Central Locking does not work


You must reset your remote control in order for the lock/unlock to work properly.

To reset remote you would:
1)Insert Key in Ignition Turn to Position 1(Don't Start the Engine) for about 5 seconds
2)Turn Key Off and HOLD the LOCK button on Remote while pressing the UNLOCK 3 TIMES
3)Release both lock and unlock buttons you are holding
4)All doors should automatically unlock

And exit the door and lock with the Remote.

Sep 19, 2009 | 2000 BMW 3 Series

2 Answers

Central locking not working


if your talking about locking with the remotes.try reprogramming them.cycle the ignition key from run to off 8 time within 10 seconds ending in the run position.the horn should honk.now you are in programing mode.hit the lock button on the first remote then hit the lock button on the second remote.and tunr the key off

Jun 16, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2000 Hyundai Elantra Logo

Related Topics:

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...