Question about 1998 Toyota Camry

Open Question

How to replace power mirror motor on 98 camry

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
chuck943
  • 783 Answers

SOURCE: HOW DO I REPLACE THE DRIVER SIDE POWER MIRROR ON AN 98 F-150?

Remove the sail panel,the little panel on inside of door at the mirror.
Remove the window regulator switch plate, pry up on the front of it with a small pick or screw driver. Disconnect the electrical connectors.
Remove the top door trim panel screw that is behind the sail panel you removed.
Remove door trim panel screw at window regulator switch plate opening.
Remove door trim panel screw in the courtesy lamp housing. Remove the courtesy lamp lens.Remove the screw.
Remove the inside door handle trim cover.
Remove the bolt.
Remove the inside door handle.
Lift upward to remove the front door trim panel.
Remove the courtesy lamp.
Turn the courtesy lamp bulb socket one quarter turn and remove.
Disconnect the power mirror electrical connector.
Remove the three outside rear view mirror nuts.
Remove the mirror.

Posted on Jan 31, 2009

Ad
  • 653 Answers

SOURCE: I need to replace the mirror glass on a 1994 camry driver side p

Start with a good thick pair of leather gloves, a putty knife, and a tall trash can. Place the trash can below the mirror, tilt the mirror inward so you get a hold of the outer edge, and carefully pry the remaining pieces of mirror from the backing plate. Do not apply any pressure directly to the backing plate, or you may damage the gears on the electric motor. You should be able to pick up a new mirror and adhesive at your local auto parts store. Use masking tape and a couple of wood blocks to hold the glass in place while the adhesive sets (blocks against the glass, then wrap the whole thing in tape).

Posted on Feb 27, 2009

  • 564 Answers

SOURCE: how to replace outside rearview mirror on 2002 toyota camry

on the door there should be a plastic panel in the area of the mirror if not take the door panel off then you should see the bolts holding the mirror in place may be 2 or 3 .reverse the process and youre good to go.

Posted on Jul 06, 2009

  • 1986 Answers

SOURCE: Need to replace driver side mirror for Camry 2002, Power mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 630 Answers

SOURCE: 1997 Camry: How do i replace the side mirror on a 92 camry...

they are usually held in by two #10 metric nuts located under the black plastic shield on the inside of the door... I am not sure if the door panel must come off to get the plastic plate off the backside of the mirror or if the plastic shield(plate,cover,etc.) can be lifted off with a pry motion from a screw driver) hope this helps.

Posted on May 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The motor on my sunroof 2000 camry. Where is the Motor located? and can i close this manually


its located over the inner mirror, to close, remove mirror panel on roof , see owner manual for more details

Sep 05, 2010 | 2000 Toyota Camry

1 Answer

My 98 camry has trouble starting without reving


the idle air control motor is sticking and need to be replaced

Feb 24, 2010 | 1998 Toyota Camry

2 Answers

How to replace passenger side mirror on 2007 Camry


To remove mirror pry off inside triangle panel(black) which exposes 3 nuts which are removed with socket wrench. Detach wire harness and pull out mirror assembly. To replace insert new mirror screws thru assigned holes and reconnect wire harness and tighten nuts to snug. Push inside triangle panel back into place and you're done! It's that easy.

Dec 04, 2009 | 2007 Toyota Camry

1 Answer

98 Toyota Camry- I replaced the battery and it starts but


One of the wire that conncts with bettery might be damaged so you wann get that thing checked.

Oct 29, 2009 | 1998 Toyota Camry

1 Answer

The side mirrors don't work on my 98 camry


Check all fuses. If good, may need a mirror switch

Jul 26, 2009 | 1998 Toyota Camry

1 Answer

Same problem. motor works


adjust your mirror to center with your hand manually and try the switch again. if it still dosn't work switch to the other side mirror and see if the other side goes up/down. if it does then replace the side that's not going up and down....you have to replace the whole assembly. can't just replace motor.

Jul 19, 2009 | 2002 Toyota Camry

1 Answer

The driver's side view mirror glass is disconnected from the power motor mechanism. How do I pop the mirror out and reattached it to the control. The mirror is not broken, just will not adjust with the...


Feel free just pull the nirror out then see if the knob is disconnected or you first check on the fuse that is meant for the power mirror.

Good luck.

Please rate this

Apr 05, 2009 | 2002 Toyota Camry

1 Answer

I need to replace the mirror glass on a 1994 camry driver side p


Start with a good thick pair of leather gloves, a putty knife, and a tall trash can. Place the trash can below the mirror, tilt the mirror inward so you get a hold of the outer edge, and carefully pry the remaining pieces of mirror from the backing plate. Do not apply any pressure directly to the backing plate, or you may damage the gears on the electric motor. You should be able to pick up a new mirror and adhesive at your local auto parts store. Use masking tape and a couple of wood blocks to hold the glass in place while the adhesive sets (blocks against the glass, then wrap the whole thing in tape).

Feb 21, 2009 | 2003 Toyota Camry

1 Answer

Need to replace driver side mirror for Camry 2002, Power mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Dec 05, 2008 | 2002 Toyota Camry

Not finding what you are looking for?
1998 Toyota Camry Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...