Question about Chrysler Voyager

1 Answer

Cant find adjustment for headlight on my grand voyager. Also wondering where the oil filter and plug is

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Chrysler Master
  • 1,619 Answers

Depends on year but adjustment of light is normally on the top adjustment nuts on the headlight assembly.
Oil filter will normally be on the forward passenger side bottom of the motor and plug on the oil pan on the driver side bottom of engine just before the transmission.

Posted on Apr 22, 2010

Testimonial: "Thanks for your help. But had to remember that being English our passenger and driver side is opposite to yours. Car is diesel oil filter found right up behind engine block on RHS ie driver side about half way up block and awkward as hell to get at and apply any sort of torque to release as surrounded by a sub frame of some sort. Adjustment to headlights found to be teks type screws on the top of each beam/bulb but ne lateral adjustment. Thanks, marc"


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Change oil and filter

please go to www. automecanico. com translate and fix it.

God bless you

May 31, 2013 | 2000 Chrysler Grand Voyager

1 Answer

How do i adjust my headlights on 97 plymouth grand voyager?

when you lift the hood and look down above the head lights and look into the holes punch out of the radiator support frame, you will see 2 star shaped holes for each headlight.
I cant remember which does what, but one does the up and down and the other moves the light to the left or right depending on which way you turn them.

Jan 27, 2011 | 1997 Plymouth Grand Voyager

1 Answer

I need to remove the headlight covers on my 98 plymouth grand voyager. They are very dirty. How do i get them off?

you cant take them apart, you will need to replace the headlights, google 1998 plymouth voyager headlights.

Dec 21, 2010 | 1998 Plymouth Grand Voyager

1 Answer

Trying to adjust headlights on a 2000 Plymouth Grand Voyager

On drivers side, Look for holes in rad support above headlights and you'll see a bubble level. Behind light housing you'll find small hex, or torx head screw just left and behind bubble level area. That's Horizontal adjustment. Now go over to right about 3 " from bubble level,just past where headlight mount is attached and look down hole for another hex, or torx screw head. That's vertical adjustment. Passenger side location will be obvious after finding drivers side adjustments.

Sep 19, 2010 | 2000 Plymouth Grand Voyager

1 Answer

Can't locate the headlight adjusment screws on 1999 grand voyager

The headlights are equipped with adjusters and a built in level to aid in proper aiming


Apr 23, 2010 | 2000 Dodge Grand Caravan

1 Answer

99 Grand Voyager, headlamps adjusted too low. Do I need a special tool to adjust the height? Do you just turn the adjustment screw or is there some release set screw that you have to loosen before you can...

Purchased a 4 mm socket and had the necessary adjustment with the adjustment screw right above the headlights. Clockwise will raise the lights while counterclockwise will lower the lights.

Feb 07, 2010 | 1999 Dodge Grand Caravan

1 Answer

Oil pressure switch where is it located on the engine. Plymouth Grand Voyager

Right beside the oil filter. Easily to change 10-15 min and cheap $15-20. Be sure to have extra rags to catch oil that will come out when you remove the unit.

Jan 05, 2010 | 1998 Plymouth Grand Voyager

1 Answer

1993 Jeep Grand Cherokee It has recently developed a clattering on start up, or shortly there after. I am assuming it is the tappits, and am wondering if you could recommend the best additive to quiet them...

Crawl under jeep find wrench should be 16mm break drain loose place pan under plug slowly remove plug drain all oil replace plug on passenger side the oil filter is screwed on engine break filter loose spin off make sure rubber seal came off with filter spin on new filter hand tighten I think the jeeps hold 6 or 6.5 qts of oil I would sub. 1 bottle of lucas oil stabilizer. crank up once oil is added watch oil pressure guage when it rises cut off check oil add accordingly

Aug 04, 2009 | 1993 Jeep Grand Cherokee

2 Answers


try to reset the battery the computer which controls the alternators output might be confused. To reset the computer disconnect your battery for around 35 minutes and then hook it back up. This should solve your problem.

Jun 11, 2009 | 2000 Chrysler Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides