Question about 2000 Ford Expedition

1 Answer

The heater of my expedition XLT 2000 is not working what is a fact

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 708 Answers

I have a 2000 XLT also. Is yours blowing luke warm air at best? If so then you need to have your core flushed. The dealership wanted $800 to put a new core in it. You can get a coolant flush done but you must specifically ask them if it flushes the core. 99% of the coolant flushes bypass the heater core. If they sound unsure make them ask someone else otherwise you will waste $90+. You can flush it yourself but it is very tricky. I can take some pictures if you need them.

If you have no warm air at all then your core is most likely bad or clogged beyond flushing.

Posted on Apr 22, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Heater blower stopped working in my 2000 ford expedition stopped working

Be certain to check your fuses, and also the ones that are under the hood.
Then, one of 3 likely events.
First, find a plug-in outside of the blower motor, and with key on and dash switch on, see if juice is getting to the blower motor.
If not, ether the relay or the blower is bad.
The most common problem is the relay, second most common in the motor, third is the dashboard switch.
God bless your efforts.

Mar 07, 2016 | 2000 Ford Expedition XLT

1 Answer

Where's is the crank sensor on a 2000 xlt EXPEDITION?

Behind the harmonic balancer. Lowest pulley on the front of the engine.

Jun 05, 2015 | 2000 Ford Expedition XLT

1 Answer

Where is the pcm relay on an expdition 2000 xlt?

It is in the battery junction box in the engine compartment ,

Jun 05, 2015 | 2000 Ford Expedition XLT

1 Answer

Heater blows no heat

please post more info is the fan working? are you low on antifreeze? the question is too vague!

Oct 12, 2013 | 2000 Ford Expedition XLT

1 Answer

2000 Expedition: I have a 2000 expedition xlt limited ed,but i dont...

Have you checked under the driver steering column? Mine was located here on a white sticker.

May 18, 2010 | 2000 Ford Expedition

1 Answer

Hey , How can I replace the bulb(s) on the a/c heater panel of my 1998 Ford Expedition XLT, Thanks

I would recommend auto zone and tell them the place where you need the bulb replaced but I do know you will have to remove trim pieces and I know they can give you a diagram print out also a dealer will do this also just go to the parts department

Jan 08, 2009 | 2000 Ford Expedition

1 Answer

Replace bulb in the a/c heater control panel

no pull the plastic lego kit up and that leaves eight 7 mm bolts

Jan 08, 2009 | 2000 Ford Expedition

1 Answer


somewhere in the back

Aug 16, 2008 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides