Blinkers don't work-fuse ok. Can't find the

Fuse 13 and 28 in the instrument panel fuse block.

Year make and model. Could be a worn flasher at the fuse panel(or close to it) or a bad hazard switch.

check under the hood for another large amp fuse 45-60 amp ,may have blown that circuit to

Make sure all outside blinkers are flashing at one speed, if not check the bulbs and all connections, If that doesn't work check flasher

make sure your fuses are ok and youve got power if ok check the blinker sender unit its usually round and silver with 2 or 3 wire going to it. usually under the dash but could be in the engine bay

You will need the wiring diagrasm, we do not have them but you can access them here www.alldatadiy.com

Assuming that you've checked the regular fuses, have you checked the relay for the blinkers? If not, one way to do so is the switch the relay for the hazard lights with the relay for the blinkers and see if that solves the problem. If it does, replace the relay so you have both blinkers and hazard lights.

Well your not going to like this but I think I can help im assuming you checked all the fuses inside the car and under the hood ? if there all good your problem more than likley is in the BCM as it controls the lights and blikers BCM stands for Body Control Module. good luck :)

check the fuse and relay that control the blinkers, also check all bulbs make sure they are good

Pullout fuse 20 and 21 and push same back in. This resets the system, this has happened to me.