At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Airbag light started flashing after changing...
U will need the dealer to reset the airbag diagnostic control module, it is holding a code for loss of battery power, this should have been done as part of the repair procedure.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Often when you lose an alternator its because the battery is too weak. Then systems start failing everwhere. Have the battery tested, chances are its got a dead cell in and you'll want to change it asap or it will cause damage to alot of relays and sub systems.
Have it checked by a professional as soon as possible, airbag has a problem wich can be as simple as a short in the wiring or as harmful as the possibility of deploying airbags without any warning. Please take advice.
If the computer in the air bag diagnostic monitor detects an open in the air bag indicator circuit and if another system fault exists, then the air bag diagnostic monitor will turn on its internal tone generator (beeper). The beep pattern is five sets of five beeps. The pattern is repeated every 30 minutes while the ignition switch is in the ON position. The five beeps do not indicate a code five or any other code. The air bag indicator circuitry must be repaired before the diagnostic trouble code can be read.
×