My hyundai remote for Hyundai Verna is not working. The locking system is not working, and the car's ignition is not working either.

In the cars, the engines use liquid cooling which comprises of various components and thus the system is a bit complicated. Here are a couple of tips you should follow to keep the Hyundai Verna engine cooling system running fine so that it doesn't surprise you in the middle of nowhere, check out the mention link
=> Top 4 Tips to Maintain Your Car Cooling System
=> How to Maintain Car Cooling System

Yes, all the variants of the Hyundai Verna have the safety features but some lowest model have 2 front seat airbags while the top models has 6 airbags along with the other safety features that you have mentioned in you question. For more clear picture, here I have provided the image of the Hyundai Verna specifications along with the other price and engine specification, have a look

if the part number is the same and it look the same yes once its a perfect match

1. Cars
2. Car Maintenance
3. General Car Maintenance
4. How to Program Keyless Entry Remotes in a Hyundai Sonata

How to Program Keyless Entry Remotes in a Hyundai Sonata By Christian Killian, eHow Contributor

• ? Pin
• ? 9
• ? Tweet
• ? Stumble
• ? Share

20Found This Helpful The keyless entry system in your Hyundai Sonata is part of the factory alarm system. If you have to replace a lost or damaged remote, reprogramming will be necessary. The remote is important because not only does it lock and unlock the doors, it also arms and disarms that factory alarm when you open or close your car doors. New remotes are available from any Hyundai dealer. While they will program it for you, you can do it yourself and save a programming fee.
How to Program Keyless Entry Remotes in a Hyundai Sonata(Kleophaus Livingston/Demand Media)

Other People Are Reading

• How to Reprogram Key Fobs Yourself
• How To Replace a Hyundai Sonata Remote

Step 1: Locate the fuse panel under the dash on the driver's side of the car. Just below it is the control module for the factory alarm system. Open the cover on the alarm system control module and locate the memory switch inside.
(Kleophaus Livingston/Demand Media) Step 2: Verify that the switch is in the "Off" position; if it is not, switch it to the "Off" position. This is important for the system to understand what you want it to do when you move to the programming mode.
(Kleophaus Livingston/Demand Media) Sponsored Links

• Download New VersionSnagit 12 Image & Video Capture. Edit & Share. Try Free Today!
  techsmith.com

Step 3: Insert the key into the ignition of your Sonata and turn the key to the "On" position. Wait for 60 seconds, then move the memory switch inside the control module to "Set."
(Kleophaus Livingston/Demand Media) Step 4: Depress and hold the "Lock" button on your remote for one full minute. This allows the remote and the control module to communicate and sync. Release the "Lock" button and turn the memory switch in the control module back to the "Off" position.
(Kleophaus Livingston/Demand Media) Step 5: Turn the ignition switch to the "Off" position and test the remote by pressing the "Lock" or "Unlock" button, verifying that the doors do lock or unlock.


Read more : http://www.ehow.com/how_6362326_program-entry-remotes-hyundai-sonata.html

stand by drivers door then close and open door 3 times with remote then on the last open jump in car and put key in and try to start within 10 secs of getting in the car ,this works with a renault but a hyundai? maybe its worth a try

Dear sir , Hyundai verna fault code p1186 we check found warring and couplers was ok and we replace injector and fuel rail problem was not resolved, cold starting engine vavrection and rpm stack and white smoke and hot conduction normal but rung conduction engine vavrection and missing no accelerator is working please suggest

I think you should buy repair manual first for your vehicle after that it will be easy for you to solve the problem. Check the link may be you will find something useful here
Hyundai

I have the same problem with my elantra 1999 you should check oxygen sensor or replace it but before that cut the yellow from the oxygen sensor if the problem gone then replace it else i dont know but try

Read the owner's/operator's manual