At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Have a 2000 Ford F350 Titon V-8 5.4L that will not turn over. Ignition lights on, strong battery, today had starter rebuilt and it's the same thing again.I can jump the starter but the ignition will not turn it on.Can you help? Thanks, Jack
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://www.autozone.com > interior > ford > 2010
Equip cars, trucks & SUVs with 2010 Ford F350 Super Duty Ignition Lock Cylinder from AutoZone. Get Yours Today! We have the best products at the right ...
Have a load test done on the battery to check for a failing cell. Check battery terminals are shiny clean and tight. Check for power from the ignition switch to the starter solenoid as this is the circuit you by pass when you short out the starter terminals.
The solenoid click sounds very strong, implying that you have a charged battery and the ignition circuit is functioning out to the solenoid. Suspect an issue with the starter motor. Is the starter motor installed and connected properly?
The dash lights coming on doesn't mean your battery is strong enough to turn the car over. That being said, I would lean towards the starter also. I would just have the battery chkd out before you go replacing other things just to be sure. Good luck to you.
is the truck standard or auto
is there a click or as stated nothing
are the wires at starter clean and tight
is there power going to starter selenoid (signal wire)
if auto try starting in nutral
if standard try to by pass clutch switch
is power going across starter selenoid
is the ignition fuse all o.k.
the problem you have is either the starter motor , or alternator draining the battery , these are the only thing connected to the battery that are live with ignition turned off ,
Turn your key on till the fuel pump comes on, then take a screwdriver and cross the terminals on your starter. If it cranks it means you have a bad ignition or ignition coil
actually the only thing i can recomend is to have the alternator replace again for warranty and before starting the truck charge the batteries very well with a baterie charger make sure to charge them individually because with a low batterie the alternator has to put a lot of load and might burnt again
specially with dual batterie.
×