I HAVEA 2006 CHEVERLET SUBURBAN 1500, AND THE CHECK ENGINR LIGHT STEAYS ON. THE CODE IS P0449; WHAT IS THIS AND WHERE IS IT LOCATED AT.

DTC P0449

CIRCUIT DESCRIPTION
A battery positive is supplied to the evaporative emission (EVAP) canister vent solenoid valve. The control module grounds the EVAP canister vent solenoid valve control circuit to close the valve by means of an internal switch called a driver. The scan tool displays the commanded state of the EVAP canister vent solenoid valve as ON or OFF. The control module monitors the status of the driver. If the control module detects an incorrect voltage for the commanded state of the driver, this DTC sets.
This Canister Normaly Sits Hidden Underhood on Rt or LFT sidr at Front under fender with 3-4 Hoses going to it and the Solinoid talked about is on TOP of Canister or Close By

Hello. Your code indicates that your emission system is acting up. If you live in California, you might have a problem passing the next mandatory emmissions test. The PCM has determined that a malfunction exists in the electrical circuit for the vent valve/solenoid in the evaporative emission control system.

Definition:
EVAP (Evaporative Emission System) purge/vent solenoid circuit condition

Explanation:
The solenoids and system wiring are monitored for opens or shorts

Probable Causes
1- Purge or vent solenoids defective
2- Check connector and wiring
3- fuel, saturated vapor canister
4- Failed EVAP vent solenoid