Will a 1999 dodge grand caravan with a 3.3 engine

Dodge Grand Caravan Maintenance & Repair Questions ...

www.cargurus.com > Questions > Dodge > Grand Caravan

CarGurus2003 Dodge Grand Caravan Power Door Problem ... hjc61 asked a 1999 Dodge Grand Caravan 4 Dr LE AWD Passenger Van Extended Maintenance & Repair ...

2002 caravan not starting, reads "done" on odometer - Discussion ...

www.topix.com > Dodge Caravan

Jun 3, 2013 - I have a 2002 Dodge caravan n the relay on but there is no power getting to the ... Also, on a 2003 Grand Caravan, "DONE" on the odometer is the diagnostics.... I have a 2002 Dodge grand caravan awd just after fixing a new ...

2003 Dodge Grand Caravan Sport AWD - for sale in ...

? 2:17
https://www.youtube.com/watch?v=s5ZEJE3CLRo
Jul 10, 2013 - Uploaded by SummersAuto
2003 Dodge Grand Caravan Sport AWD - for sale in LOVELAND, C ... We specialize in getting our customers financing on car loans through our bank no ... Exterior Mirror,Power Door Locks,PowerWindows,Rear Brake Type: ...

Minivan all wheel drive setups and performance - Allpar

www.allpar.com/eek/awd.html

Description of all wheel drive setup in Chrysler, Plymouth, and Dodge minivans. ...The Rear Driveline Module has a differential in it, and sends the power to the rear wheels ... According to a Chryco engineer, the AWD system was not incorporated for the ... I have a 1997 AWD Grand Caravan and have recently replaced the ...

Dodge Grand Caravan Reviews and Owner Comments

repairpal.com > Car Reviews > Dodge

December 24, 20142002 Dodge Grand CaravanVisitorSalisbury, NC .... seat belt straps replaced, power window stopped working, Only 30 thousand kms. .... 20235.00 miles and no major Needs Radiator. and leeks oil But I love it this is my 3rd ... I have a 1993Dodge Grand Caravan LE with a 3.3L V6 and All Wheel Drive.

Dodge Grand Caravan Repair and Maintenance - RepairPal

repairpal.com > Cars > Dodge

Try changing the door switch. It should be a relatively easy fix if that is the problem.

the speedometer cable could be broke, you can check this, you will have to get under the van, look at the transmission, there will be a cable that screws on. unscrew the cap that holds the cable to the transmission when you pull it off you can try to turn the inter part of the cable it should turn freely, then pull on it, if it comes out its broke. you can buy one at any auto parts store.

There are 'solution kits' available for this issue. It involves replacing the tensioner pulley and the idler pulley and installing a double sided belt. They are available from Gates, Continental, and AC Delco at RockAuto at the link.
http://www.rockauto.com/en/catalog/dodge,1999,grand+caravan,3.8l+v6,1354069,belt+drive,belt+drive+component+kit,10660

Hi...sounds like you need to have your 3-2 shift solenoid in the transmission replaced. Go to a local Auto Zone auto parts store near you and ask them to check you computer codes to see if this solenoid shows up. They do not charge for this service.

TRANSMISSION CAPACITY WITH FLUID+ FILTER CHANGED HOLDS 9.1 QUARTS.

I do not know if you have the 3.0L V6, 3.3L V6, 3.3L Flex-Fuel V6; or the 3.8L V6 Engines; however I have included all below:

For the 3.0L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.....(back)
1......3.......5
2......4.......6
.....(front)
Distributor:
...(back)
......1
3..........2
5..........6
......4
...(front)

For the 3.3L AND 3.8L V6
Firing Order:
1-2-3-4-5-6
Cylinders:
.....(back)
1......3.......5
2......4.......6
....(front)
Ignition Coil:
(back)
5..1..3
2..4..6
(front)

For the 3.3L Flex-Fuel V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
....(back)
1.....3......5
2.....4......6
....(front)
Ignition Coil:
(back)
6..3
4..1
5..2
(front)

yes if they both have the same engine both of those years are interchangeable

You would have to repeat the problem with the scanner hooked up and someone who knows what he's doing watching it. If the check engine light came on then a code will be stored.

When the trans. sticks itself in 2nd gear and stays there is because it's detecting a trans. problem and puts itself in "limp in" mode. When it happens again, to somewhere to have a scan done on the trans. so you can find out which sensor on the trans. is acting up.