At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How do i change the head light bulbs on my 2007...
On 06 ,there are 2 rods that snap into the headlight mount Carefully unsnap(forward ) and wiggle and lift at the same time.Pins out , remove headlight assembly.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check for proper installation if you you install it properly you should have adjust the head light again by two nut behind the head light one for vertical another for horizontal
)
Open the hood. On top of the headlight assembly are two L-shaped metal
pins (they look like allen wrenches) about 5 inches long. Unhook then
and pull them straight up. This will allow you to remove the upper headlight
assembly. 2) There is a plastic clip on the outboard end of the lower
light assembly. Push the plastic clip outward will detach the lower
light assembly, and you can pull the assembly straight out. 3) Untwist
the light blub bracket counterclockwise. 4) Pull the bulb out, and
replace it with a new one. 5) Reverse the process to install
1-Pull the whole control out with a flat screwdriver
2-Twist out the bad light
3- replce with a new micro bulb
You can buy them here
http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Finstrument.html
Follow the wire harness down to the junction box were the wire harness plugs into under the truck adn ck for corrosion especialy if you live in a snowy area corrosion due to road salt.
Look under the bumper and you will see two large phillips head screws
right in front of the wheels. Take these two screws out and bend/move
the plastice piece out of the way. Now you can easily get to the bulb.
There is a cap that twists off that protects the wires and back of the
bulb. Twist this off and then remove the plug portion from the back of
the bulb. The bulb then turns 1/4 to 1/2 revolution to loosen and
remove. Reverse steps for installation.
You should be able to reach under the hood into the headlight assembly and grab the bulbs and twist them off if not then you have to take off your entire headlight assembly then take the bulbs out.
Brake lights were easy... open hatch you will see 2 lil circle covers with a notch out of the bottom for removal... i used a flat head to remove these then used a phillips head screw drive to remove the two screws behind the covers... pull out unit and you will see where the bulb goes... pull that out and just put the bulb in. It was sooo very easy... thanks Kim
×