Take off wheels, Take off rotors, calipers, and caliper brackets, remove big center axle nut, remove 4 bolts behind hub, tap on the axle with a hammer till it comes loose, hit on the bearing and it will slide off
It all should be nuts and bolts buy a replacement bearing hub, so that you can be sure but i am pretty sure any one with common sense and some tools can do this auto zone or advance auto parts have loaner socket sets to remove axle nut the rest is small sockets.start by loosening the axle nut while tire is on the ground then remove tire and disconnect,ball joints and tie rod then remove the caliper so you can remove the spendle, in the back you should see three bolts that hold the bearing remove them and you might have to use a chisel to separate the bearing from spendle reverse installation
643 views
Usually answered in minutes!
×