- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most of them ,you squeeze the bulk head ,the connector and pull,and wiggle them off,but they still use the ones it takes a tool to remove the lines,they are not expensive,and are available at the parts store,if they are plastic,then they more than likely squeeze to remove,but still are difficult to remove
You need to return the remote to midwest keyless and either tell them to give you a remote with the exact part number or buy one off of ebay. They are about $60 from the dealer. When the doors lock and unlock, the computer is telling you that the brain is now in learning mode but it is a must to have the correct remote. I have programmed thousands of keyless remotes so please believe what I say. You can program up to 4 remotes for one car but they all must be programmed at the same time. If you buy one remote and program it then get a second remote at a later date, you need to program both simultaneously. If you just program the second remote, the computer will no longer recognize the first remote. That is just some extra information for you. Let me know if you need any more help.
DO'ES THE VAN TURN OVER ? DO'ES THE VAN HAVE THE FUEL PUMP RUN LONG ENOUGH TO BUILD FUEL PRESSURE?IF YOUR FUEL PUMP AND STARTER ARE WORKING THEN CHECK FOR FIRE TO THE PLUGS. YOU MAY NEED TO GET THE CODES READ TO FIND THE PROBLEM IF YOU HAVE FUEL AND FIRE.ONCE YOU GET THE STORED CODES,REPLACE THE SENDER THAT CAUSED THE CODE OR REPAIR THE WIREING TO IT.
Try 0000 first and if that does not work, go to www.radio-code.com they should be able to get your radio working again. Good luck and let me if this helped.
×