SOURCE: how to install a 1995 e320 wagon fuel filter
First thing to do is to locate the fuel filter, most likely down near the tank.
Second thing to do if it is a fuel injected engine is to open the bonnet and find the main fuse box. Remove the Fuel pump relay, or fuse. This will prevent the fuel pump from working. Now start your engine and run it until it stalls out. Shut off the engine, go to the fuel filter and remove the clamps or spring clips attaching it to the fuel line.
Now take the filter off and replace it with a new one, make sure you snug up all the connections. Now go back to the front and replace that relay or fuse. Turn the key until the and wait until all the dash lights have gone out or stopped flashing. Wind over the engine until it catches and runs. Put the hand brake on and with the vehicle in neutral if a manual or in park if auto.
Check the filter for leaks if leaking turn it off and tighten the clamps, try not to refit old clamps or spring clips always try to fit new ones and new fuel hose if possible. Make sure if you fit new fuel hose you fit Fuel injection hose, not standard fuel hose. As the standard fuel hose will split due to the pressure.
Viola your done. Drive and check for abborations.
694 views
Usually answered in minutes!
×