Transmission Range Sensor "A" Circuit (PRNDL Input) check the connector at the transmission switch if ok replace the range selector switch
How much of a problem Is It To Replace The Sensor? Is There Any Adjustments To Be made?
Yes you must adjust the switch, but use the bolt head marks on the old switch as a guide to set the new switch, the switch is on the side of the transmission and is under the shift cable and goes over the post that the shift cable snaps on to, it is held in place by 2 bolts. Below you will find a picture of the typical switch used on this truck.
×
640 views
Usually answered in minutes!
×