Question about 1992 Toyota Camry V6

2 Answers

92 toyota camry timing belt not turning car quit running,took dist.cap off not turning,tore down to timing belt real greasy there and timingbelt covers belt not broke or off trys to move a little when you crank motor what could be wrong or is it something bad wrong

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 701 Answers

Hello tim42220: y name is Roger and I will help. If the timing belt does not turn when you crank the engine the belt is bad. The belt has a habit of striping the teeth of a the crankshaft gear. This engine shows to be a non-interference engine. That means if the belt breaks the valves should not bend. This is something you should be able to do if you are mechanically inclined. Main thing is to be sure all timing marks are right. I would strongly recommend replacing the water pump at the same time. The water pump is turned by the timing belt. Should the water pump go bad it will also damage the timing belt. They do make a timing belt kit that includes the belt and all new timing belt idler pulleys. You will need to reload the belt tension-er. This is the worst part as it is hard to reset the plunger. Easier to by a new one but they are not cheap. If you look at the new belt you should see two solid stripe markings and one stripe that is a dotted line.I would also replace the camshaft seals as they are the reason for the oil leaking onto the timing belt. When installed correctly the marks align with the timing marks on the engines cam and crankshaft. Enclosed is a picture of the timing marks.Should you need further help please just ask. Please rate your answer. This way I know it helped. Thank You for using Fix Ya. Roger92 toyota camry timing belt not turning car quit - 6f56668.jpg

Posted on Mar 20, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Blown motor... kinda easy fix

Posted on Mar 20, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

1 Answer

Replaced timing belt now wont start and turns over fast is getting fire and fuel why wont it start


The belt is not installed correctly. When you removed the old one, one or both of the cams jumped from valve spring pressure and now you'll have to remove the front cover, re-time the cams to the correct position.

http://www.tracystruesoaps.com/tutorials/gen2tb/timingbelt.html

Feb 22, 2011 | 1993 Toyota Camry V6

3 Answers

1991 toy camry 2.0 My car was running good. Had oil leaks. I changed valve cover gasket and dist o ring. Made mistake of not marking Dist. location. I put back together started but missing very bad....


check the condition of the contacts on the cap if worn replace cap,check the the ignition coil out put on both the primary and secondery curcuits

Sep 27, 2009 | 1991 Toyota Camry

1 Answer

92 Camry, have to start several times before engine turns on, onl


weak fuel pump, clogged injectors, air or coolant temp sensors out of specs. Timing belt was put on wrong. Timing is off. Map sensor out of specs. You do have a light on. Fixing why the light is on may fix your problem.

Aug 06, 2009 | 1993 Toyota Camry V6

1 Answer

Hard starting in wet weather


Replace the ignition coil under the distributor cap. What you have is a hairline crack in it, and, when it is damp, the spark arcs out of the crack to ground, no spark. This is a VERY common problem with older Camrys. Take the coil off, and look at it real closely. You will see black marks on it, from the crack. I am very sure that this will eliminate your problem. Thanks for choosing FixYa!

Nov 07, 2008 | 1991 Toyota Camry

2 Answers

Milky sustance in radiator


it is motor oil toyotas are not made to run hot u have a blown head gasket it is also a good idea to replace ur timing belt while making the repair and flush ur radiator before runnning motor after repair

Jun 15, 2008 | 1993 Toyota Camry V6

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

1,499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

Jonah Oneal

Level 3 Expert

14053 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...