SOURCE: how to remove water pump from 1999 pontiac grand am GT
After you drain coolant remove the larger hose at the bottom of over flow tank and the 2 smaller hoses at the top. remove the 1 bolt holding the overflow tank on and remove tank. Next take serpentine belt. Take the 4 bolts off holding on the water pump pulley and remove pulley. Next remove the 5 bolts holding water pump in. Clean water pump housing of old gasket and clean with alcohol or paint thinner to remove any residue. Use a small amount of RTV sealant along with a new gasket and put in the 5 bolts tightening them by hand. Next tighten the bolt a quarter turn at a time until tight.put on pulley, put in overflow tank and attach bolt and 3 hoses .
SOURCE: belt routing diagram 1999 pontiac grand an gt v6
i belive this is the same as a 96 ? which has an auto tensioner towards bottom of engine towards rear of engine
161 views
Usually answered in minutes!
×