At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
wiring harness should be under the left side. covers on the floor area , next to the seats....... in the post area, that your front door locks into , and the hinge area on the rear door..... wiring is wrapped in main harness....
Obviusly, check fuses. Do they operate from the passenger door control? When ever you have a problem with a door switch on the driver's door, always check wire integrity in the driver's door jam harness.
Hello, 2004 Mercury Mountaineer fuel filter is located in front and on top of
fuel tank behind two shields. This is for 4.0L 2 wheel drive. When you
look just behind the front passenger side tire you will see the first
shield. Behind that is the second.
Well you could take the door panel off and fool around with the lock till you get it to work. If you want to get lazy take a crow bar and open the door with that, but it will more than likely break the door. Sounds the lock seized up and will take you working to get it loose,
Get the VIN# from the vehicle, either on a plate under the hood or on the front of the windshield down low. Once you have the VIN# which is (VEHICLE IDENTIFICATION NUMBER) contact mercury and they can give you all codes for the vehicle.
×