I work for a dealer in canada and i have no idea what that code means as i use dealer products, but its probably you pass side seat occupancy sensor which would require replacement and software, Unless you've gotten into an accident than the seat is a common problem,try checking the connections under the seat as something may have fallen under the seat and broken a connection
Hey,
take a look at www.airbagmodul.com
They're working in Airbag-Simulators, Occupancy Sensor-Simulators and Seat Belt-Sensors.
Regards
Gerrit
SOURCE: BMW 745i airbag light. Told to replacing airbag clockspring
Hello , check the airbag contact sensor behing the grill assembley . They are located to the left and right of the grill almost to the headlight assemblies. Check the wires to them for corrosion and damage. Check the fuse as well. There should be an air bag testing wire or fuse in the fuse panel. DO NOT UNPLUG THE AIR BAG SENSORS OR HIT THEM !!
SOURCE: How do I reset the radio code on a 94 BMW 525i
remove the radio, call in the serial numbers to the dealer, they will give you the code.
SOURCE: oil change reset for bmw 525i
You only need to hold the left odometer reset button while turning the key to position 1 (Accessory). Keep holding the button for 5 or so seconds until any of the following shows in the display: OIL SERVICE or INSPECTION with RESET or RE. Release the button and press it again for another 5 or so seconds until RESET or RE flash. While the display flashes, press the button one more time briefly. If done correctly, END SIA should show up for a few seconds. All done.
Thank you for using fixya
1,342 views
Usually answered in minutes!
×