-
Master
15,935 Answers
- Posted on Mar 01, 2010
Re: Where is my crank sensor located on my 2004 pt...
The camshaft position sensor is mounted to the rear of the cylinder head.
Removal & Installation
2.0L & 2.4L
-
Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
-
Remove the negative battery cable.
-
Disconnect electrical connector from camshaft position sensor.
-
Remove camshaft position sensor mounting screws. Remove sensor.
-
Loosen screw attaching target magnet to rear of camshaft.
To install:
-
The target magnet has locating dowels that fit into machined locating holes in the end of the camshaft.
-
Install target magnet in end of camshaft. Tighten mounting screw
to 3.6 Nm (32 5 inch lbs.) torque. Over-torquing could cause cracks in
magnet. If magnet cracks replace it.
-
Install camshaft position sensor. Tighten sensor mounting screws to 13 Nm (115 15 inch lbs.) torque.
-
Carefully attach electrical connector to camshaft position sensor.
-
Install the negative battery cable.
-
Install the air cleaner lid; connect the inlet air temperature sensor and makeup air hose.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
×