Try this:
The timing marks depend on the engine. If its TDC or BDC on the Number 1 cylinder. If your simply replacing a timing belt make note of the cam gears before the belt comes off that way when you replace the belt the cam gears are stationary where you left them. There should be a dot on each Cam gear if your engine is DOHC.
SOURCE: i need to put a timing belt on a daewwoo lanos
Go to mechanic and ask him to put a new timing belt, its the aftest way.
SOURCE: 2.0 L Timing Belt Marks
hi if its a twin cam ford engine you wont find marks on the cam pulleys.what you have to do is take off the cam cover and look at the back of the cams you will see slots in them ,what you have to do is you can buy the timing kit for the engine at the main dealers or you can make you own using a flat piece of metal 5mm thick and100 mm long this fits into the two slots at the rear of the cams to lick them in place and th crankshaft pulley mark should be in line also.best of luck.
SOURCE: Timing Belt Diagram fpr 1993 Toyota Corolla
all timing gears are marked useing a small indent on the gear and the bottom pully i would say will have a small {V} look very carefully they are there.adrian
SOURCE: Timing mark locations on EJ22 subaru engine
Complete instructions including pictures for the 22 http://www.subaruvanagon.com/tom/Timing%20Belt.htm
SOURCE: how to set timing on 2000 kia sportage
I hope this well help you.
Testimonial: "this is very helpful"
309 views
Usually answered in minutes!
×