Entering radio codes for a 1998 passet

Sorry that info is stored on the factory computer information system, and not free to access.

it should say in the anti theft section of your owners manual i hope this helps you please give good rating thank you

Unfortunately they is no way round this problem. sorry you will have to bite the bullet and pay the $75

The 300 codes are misfire codes, do a tune up and that should fix the problem. the 155 i will have to investigate and try to see what it is.

How to exit the 1998 VW Passat radio out of SAFE mode:
IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!
The sequence of radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

You will need the code to get it working. You may need Audi for this. Never disconnect the battery, or the alarm with trip on. Since it is frozen, I would try and remove the fuse, and reinstall it to reset the stereo. Then try the code.
I got lucky in my 2001 VW passat, when the stereo code was needed, but then the next day it started working by itself.

Hi
Wiih most radio units....If you have the proper code and have NOT tried more than 15 times to enter an incorrect code....you should be ok.
Turn OFF ignition switch and remove the key. Switch OFF interior lights. Switch ON Radio unit and SAFE will appear.
Leave everything alone for a period of ONE HOUR. During this time NO power (no matter how small) should be drawn from the battery. This is why the interior lights MUST NOT come ON when the door is opened. Trunk should also remain closed. In the event of any power been drawn from the battery in this time...You must start all over again.
Radio should after this time return to standard mode...Usually 4 flashing bars. Then enter your code. Dont forget to lock in the code and all should be fine
All the best with it
John

No the vin number has nothing to do with the radio code the dealer has a automated phone number they call and tells them how to retrieve a code and the manufature gets the unlock code from this,try to google radio unlock procedure for the vw passat.

You should be able to call the dealer and get the code for free. They may ask you to fax over proof of ownership. They always give me the codes when I call but I do own a shop. If a shop is telling you it cost 75.00 they are just wanting you to buy thier lunch for the week.

Passat 97 need to re-enter code ( 4 ) digit, however it shows the number 2 on the on screen when the radio is turned on.
Help. I need to know the steps to reset. thanks