Remove the rear console section (two screws, one on each side at the rear of the section), then remove the front console section (four push-pins, two on each side and two screws at the back of the console revealed after removing the rear section) and remove the screws holding the shifter plate down or try to work the bulb holder out. The holder twist into the underside of the plate on the driver side of the plate.
For
car not changing gears it can be shifter assembly issue, or it can also be
transmission issue. Get the shifter assembly inspected with ignition OFF.
For
more troubleshooting, I suggest you to get the Following help link checked, its
complete step by step procedure to inspect gear shift issues: -----
GEAR SHIFT ISSUES
http://alltypesofpartsreplacing.blogspot.com/2012/11/gear-shift-issues.html
==========
These will help.
Thanks.
191 views
Usually answered in minutes!
×