Door panel and bezel removal

There are two screws in the door pull (which face straight down) - remove those first.

Next remove bezel around inside door handle. Carefully use screwdriver to push in on four tabs (at the four compass headings) and pull out on bezel. These are easy to break as they get brittle with age.

Start at bottom of door (using a trim removal tool) and pry out door fasteners (white posts which fit into friction fittings in door). You have to pry pretty hard. Use trim removal tool to apply force right at fastener. There are 3-4 on bottom of door and two on each side.

Once all the fasterners are loose. Carefully look behind door and remove the doors light and speaker connectors. The Speaker Connector can be hard to get to - you may need some help holding panel. Be careful because the wires to speakers are delicate and easy to break.

Once the panel is loose - roll down windows and pull up on door panel. It has a lip that fits over top of the door opening. You must pull straight up to disengage it.

That's it all done - not really hard but will seem a little strange at first. Take your time and be careful and the seconds one will take much less. I've had to remove all four of my door panels on my 1999 K1500 to replace window and lock motors. But, after 200,000 miles the 'burb is going strong.