At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Remote locking New Grand Vitara. Can I change two press operation to unlock all 5 doors to a one press operation as most makes offer this as an option.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove key from ignition switch.
Close all doors.
Open drivers door
Insert key and turn to ON position and within 10 seconds turn key off and remove key.
Within 20 seconds Close and open drivers door 3 times.
Insert key and turn to ON position and within 10 seconds turn key off and remove key.
Locks should now lock and unlock automatically to confirm you have entered programming mode.
Press the UNLOCK button on remote and locks should cycle to confirm programming.
Repeat step 8 on each additional remote.
Exit vehicle with keys and remote, close door test remote(s).
And I personally suggest you find a professional key fob installer in your area. he will help you properly
Thaks
don't have 2 fobs?
it cam with 2,
and the battery must be good.(for buttons to work on fob)
never run any car with only 1 fob or one key.
or get locked out.
are you saying the metal cut key end (pure mechanical ) failed?
my car has a real key with a a transponder inside .
it can open 2 ways, the keyfob buttons, (takes a good battery)
and the key metal end.
most newer vehicles will not lock the door with the keys in the ignition and/or the keyless start remote fob in the vehicle. Vitara has a small button on the handle that will unlock the door if you have the fob in your pocket if the fob is in the car it can"t be secured since it is set up to unlock when the fob is within a couple feet of the vehicle. I know this is a late post for your question maybe it will help others
You lost your program of the key module follow these instructions.
To Program a Remote for a VW
Put your good key in the ignition and turn to "ON", do not start the engine. Make sure all the remotes you want to use are present because they have to be programmed at the same time. - Close the door and insert key #2 into the driver's side lock. Lock the door. -Within 5 seconds of locking the door, press unlock 2 times on the new remote, key #2. -(if this is remote #3, press unlock 3 times. if this is remote #4, press unlock 4 times). -If there's a chirp or beep do not press it again. This means that the car has recognized the new keyless entry remote. - Repeat with other remote or unlock the car and turn off - done.
Programming When Remote control buttons operated repeatedly while vehicle out of range and system becomes inoperative. System malfunction. How Ensure ignition switched OFF and all doors closed. Proceed as follows: Within 10 seconds, open driver's door and switch ignition ON. Within 10 seconds of switching ignition ON, switch ignition OFF. Within 20 seconds of switching ignition OFF, press and release driver's door contact switch 3 times. Within 10 seconds of releasing driver's door contact switch, switch ignition ON then OFF. Within 20 seconds of switching ignition OFF, press and hold both remote control buttons in turn for at least 5 seconds. The driver's door should lock and unlock once. Within 5 seconds of driver's door locking/unlocking, press remote control lock button Fig. 1 [1] or unlock button [2]. Programming procedure complete. Confirm programming has been successful by locking and unlocking vehicle. NOTE: A maximum of 2 remote controls can be programmed.
1. Driver's door OPEN and unlocked, all other doors closed and locked.
2. Insert YOUR key in ignition, DO NOT TURN, remove key.
3. Using the MANUAL lock/unlock button ON THE DRIVERS DOOR, slowly press lock and unlock 5 times (count the lock 5 times and unlock 5 times).
4. Shut door.
5. Open door.
6. Using the lock/unlock button ON THE DRIVERS DOOR, slowly press lock and unlock 5 times (count the lock 5 times and unlock 5 times).
7. With the door open insert your key into the ignition, turn to on position (DON'T START), wait 5 seconds. Turn off and remove key.
8. Locks should cycle once (Car will lock and then unlock once). If they don't cycle or they cycle more than once, do steps 1-7 over.
9. Now using the remote, push lock button, hold for one second,
release. The locks should cycle once. If not, start over and go slower.
10. Close the door. Open the door. Press the lock button on the remote. The locks should cycle. Close the door. Press the lock button on the remote, the doors should lock. Press again and the doors should unlock.
xl-7 programming instructions first you need to stuff your head up under the dash and locate your module drivers side upper corner under dash does it say programmable transmitter (the first models had no programable modules) if it says that then...... 1 confirm all doors are shut and key is out of ignition 2 open drivers door insert key and turn to on within 10 sec 3 turn ignition switch to off in 10 sec 4 push and release drivers door switch 3 times in 20 sec 5 turn ign. switch to on in 10 sec 6 turn ign. switch to off in 10 sec 7 press and hold lock and unlock button on transmitter for 5 sec within 20 sec of step 6 alldoors will lock/unlockto confirm correct process 8 press lock unlock buttons on second remote within 5 sec after step 7 once again all doors will lock/unlock to confirm 9 to add another remote up to a max of four repeat steps 1 through 8 this was taken directly out of an owners manual supplement that comes with a new keyless entry kit (part number for a xl-7 or grand vitara can't remember which one it goes to but it works on either one is 84900-67810) which you would have to purchase if yours is not programable these instructions are the same for vitara, grand vitara, xl-7 and the esteem hope this helps
×