At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I NEED TO REPLACE THE POWER STEERING PRESSURE SENSOR...
Hi!
The power steering pressure switch is mounted in the pressure line between the steering gear and the steering pump.
Just follow the line from the pump and you'll find it.
Good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That diagram is internal. It is inside the steering wheell hub. The entire turn signal switch will more than likely need replacing. It is a pretty difficult procedure for an for a novice mechanic.. You have to disable the airbag system before removing steering wheel. Buy a manul for the car and you may be able to achieve this. Good luck I hope this solves you problem. Please post a solved comment on fixya, so I recieve credit for the solve. This will increase my ranking on fixya.com That is how I get paid. By knowing I am helping someone!!!!
There is no power steering "sensor". There is a power steering pressure "switch". If this is what you are looking for, it is located on the power steering pump.
There is a big nut that you have to loosen by the pump. this is a lock nut. then you can unscrew the sensor. if there is no room to unscrew it, you have to remove the pump. some times it is easier to remove the bracket the pump is on.
you can but what are the price of the parts .just a pain to get at the fittings just make sure they are the right hoses and they are put back on the high pressure and low pressure sides .cut the old ones and tap a socket over the fitting rather then wrench might strip it and have troubles geting out and root them the same spot the old ones came from
×