Question about Ford F-350

1 Answer

I own a F350 2001 4x4 V10 I an having issue with the fuel pumps i have replased it twice and am about to do it again what could causes this so many times and how do you replace the fuel pump

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 453 Answers

The cause of the fuel pump going out all the time its where its made China, Mexico ect... junk parts. It took me 3 to 4 times before I found one Made in the USA and this was in a years time frame. I haven't had the problem since. The fuel pump is in the gas tank. If you take it in somewhere it will cost you about $700 and up. Or you can do it yourslf.

1. Get a jack and a block of wood
2. Unbolt the skid plate and jack up to tank
3. Unbotl gas tank straps and filler neck that goes to the gas tank
4. Lower tank slowly and remove gas lines
5. Undo retainer ring on tank that holds the gas pump in
6. Empty gas tank it will make it easier to left up
7. Replace fuel pump and reinstall

Posted on Feb 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 F250 V10 where is the pressure regulator


Im pretty sure this is it. :::1b851a65-ce94-4055-9690-fdc7ed5bc3a1.gif
LOWER LEFT.

Dec 04, 2013 | Cars & Trucks

1 Answer

I just had my fuel pump replased and now I have been smelling gas and it is leaking


You are going to take it back to the shop that replaced the pump, right ? ?

Sep 10, 2012 | 1990 Dodge Caravan

1 Answer

2000 Ford V10 will not start. Will start with starting fluid.


Fuel filters don't typically clog from a vehicle sitting.My 1st guess would be the fuel pump(motor sitting stationary has made a contact on the armature corrode).Try thumping the fuel tank with a rubber mallet while someone turns the key on to prime the pump(turn to run,wait 5 seconds,shut off,wait 15 seconds,repeat).This might get the pump moving again.

May 09, 2012 | 2000 Ford Excursion

1 Answer

Car keeps shutting off while driving. We have changed fuel filter twice worked good for a couple of days and then started again. Any ideas what could be causing this?


Fuel filter is the best place to start but sometimes the fuel pump can cut out intermittently as well and it is also possible that your injectors are gummed up. Perhaps a higher grade of fuel might make a difference or fuel injector cleaner once a month when you fill your tank might help if it is an injector issue.
I am not certain how to tell if the fuel pump is intermittently cutting out other than eliminating other reasonable possibilities. I had that happen to me and like you I changed the fuel filter and ran injector cleaner through my tank and still had the problem. I dropped the tank and replaced the pump and it ran great afterward.

Feb 02, 2011 | 2000 Oldsmobile Alero

2 Answers

2005 F250 V10 gas Super Duty. Cranks but does not start in cold weather. Truck is from warm weather area now in freezing weather for first time. No pressure from fuel pump. Pump changed, same problem.


probly hav a wiring issue--also chec fuses and relays--inspec fuel pressure regulator in engine area--try to get a diagnostic scan from a mobile mech--a haynes manual is a must for detailed troublshootn

Dec 10, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

20 amp MPI fusible link keeps blowing. turns over but acts like getting no gas until you replace fuse stars fine then blows again.


hi it is must likely youer fuel pump
after replaceing fuse lising for loud nose from
pump if so replase pump

Dec 03, 2009 | 1988 Mitsubishi Pickup

2 Answers

Where is the cam sensor located on a dodge v10


It is located under the injection pump but you may have to pull the pump to get it it a tight fit.


Sep 21, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

95 gmc safari problems


yes delivers the fuel bat is not enaf pressure replase fue pomp end you be ruaning agein

Jul 12, 2009 | 1995 GMC Safari

1 Answer

Van has poor pick up after short time of running


Did you replace the fuel filter as well?

May 20, 2009 | 1996 Chevrolet Astro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...