Question about 1992 Toyota Pickup

1 Answer

I have a 92 toyota truck i need to remove the transfercase, i have taken out the bolts i saw 5 or 6, it still would not come off. iam i missing something?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 507 Answers

Did you get the one or two that hides right on top of the transfer case? Easily missed by many.

Posted on Feb 09, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to remove a front bumper off a Toyota celica 1996

1. The sides of the bumper are held to the body with a single screw/bolt. Take these out.
2. Open bonnet
3. You will now see several 10mm bolts holding the bumper to the main body. These need to be taken out.
4. The sides (just underneath the headlight) are held in place by white plastic clips. Carefully pull the sides away from the clips.
5. From the front carefully pull the bumper out from the main body.

Sep 14, 2013 | Cars & Trucks

1 Answer

92 toyota 3.0 3vze thermostat needs replaced

Drain the antifreeze and follow the lower radiator hose to where to bolts onto the water pump. There should be three 12 millimeter bolts. Remove those and replace the thermostat. The antifreeze will drain out of the block. Make sure you have the new thermostat gasket in place around the thermostat. Use a small bit of silicone for sealing. Installation is reverse order of removal.

Jan 13, 2013 | 1992 Toyota Pickup

1 Answer

Iam trying to figure out what the gear ratio in my rear end of my 92 toyota 4x4 4cyl pick

i have 92 toyota pickup with 4cyl running 36's with 5.29 gears pulls them just fine

Jul 29, 2012 | 1992 Toyota Pickup

1 Answer

Does the 91 Toyota 4runner AT have a secondary transmission filter?

You have a leaking trans output seal leaking into transfercase adapter or trans tail, need to remove transfercase to replace and order seal from a dealer they are hard to find any were else. good luck

Jul 08, 2012 | 1991 Toyota 4Runner

1 Answer

I am trying to seperate the engine from the transaxle VTEC/Automatic. I am sure that the case to case bolts are all removed, as are the torque converter bolts. I have also removed the rear motor mount. Is...

have another look their is something somewhere holding it and iam know you have missed something ,what about the metal plate at the bottom that keeps the muck out ?'

May 25, 2011 | 1994 Honda Accord

1 Answer

How do you replace the rear shocks in an 01 Toyota Celica gt


Apr 18, 2010 | 2001 Toyota Celica

1 Answer

Got the cap off no problem. Saw one bolt on the dist. and removed it. Can't seem to pull the old dist out. Am I missing another fastener somewhere? Is there some trick to removing the distridutor? HELP!

Have a really really good look around base of distributor for more bolts Quite often second one hidden underneath Sometimes really got to pull hard on dizzy while twisting back & forth to get them out (Carbon buildup)

Jan 27, 2010 | 1994 Toyota Camry

1 Answer

My 2000 dodge ram 1500 4x4 5.9L is running like it is missing and the fuel pressure is not staying up when the key is on and the engine is off. but when it is running at idle the fuel pressure is jumping...

The pump times out without a spark signal. Running you remove the vacuum line from regulator to get press. Like 60 to reg ,35/40 to injectors. Just an example not your veh spec. I have a 92 Dakota 5.2. So your issue is the missing? Need help Iam here

Sep 28, 2009 | 2000 Dodge Ram 1500 Truck

Not finding what you are looking for?
1992 Toyota Pickup Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides