Question about 1992 Ford Aerostar Extended

1 Answer

I can't locate my oil filter on my 92 ford aerostar it's a 4l can you help me. Where do I look around?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Look anywhere and everywhere on the engine block, im not a ford expert but it should be attached to that. it could be covered and camoflauged with dirt and grease so look carefully. look around suspension members, steering components, anything, since its a straight block it will either be sitting vertical or sideways, (look at your new filter for a reference of what it actually looks like) 

(in some cases your filter will be just a filter, with no metal casing. if this is the case look on top of the engine, there should be a cap with a large hex nut on it, turn it counter clockwise. note this example i have only seen on the new chevy cobalts so there is a VERY low chance of this being on your ford too)

Posted on Feb 08, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the power of engine ford aerostar 1992

The '92 Ford Aerostar wasn't exactly a monster under the hood. The entry-level engine was a 145-horsepower Vulcan V6. Buyers could upgrade to the 155-horsepower Cologne V6, which delivered 230 lb.-ft. of torque. The upside of this moderate power was impressive fuel efficiency, especially for a midsize minivan with a curb weight around 3400 pounds: the Aerostar rated at 17 mpg city, 23 mpg highway.

Aug 20, 2017 | Ford Cars & Trucks

1 Answer

Wiring schematic 92 Ford Aerostar with TBS0073 starter motor

Apr 22, 2017 | Ford Cars & Trucks

1 Answer

Diagram for putting on altenator belt for 92 ford aerostar van

Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine size and options (AC/No AC etc.).

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Mar 22, 2010 | 1992 Ford Aerostar Extended

2 Answers

Where is oil pressure switch located on 1993 ford aerostar 4.0 liter

i enclosed a diagram to help you locate your switch, i circled two switch,the oil preasure switch and the low oil level switch. hope this helps you.ae0b5e8.gif

Mar 05, 2010 | Ford Aerostar Cars & Trucks

1 Answer

Need help with a clockspring wiring connection on my 92 aerostar.

That wire if it is black and pink goes to the igntion tumbler. chime. remove the tumbler to install.

Sep 30, 2009 | 1992 Ford Aerostar Extended

1 Answer

I have a 92 ford aerostar van, is there a diagram available that shows where the fuel pump AND the filter is located?

the fuel filter is under the vehicle under the driver side seating area. and the fuel pump is in the tank itself and must be dropped to replace if you would like a diagram try joining for free and they have many free diagrams of your vehicle for service reference

Sep 25, 2009 | 1992 Ford Aerostar Extended

1 Answer

I have a 92 Ford Aerostar no injector pulse!


Jul 30, 2009 | 1992 Ford Aerostar Extended

1 Answer

Changing oil pan gasket on 1989 Ford Aerostar

drain the oil from the pan and remove the filter.
Lift the car up and secure it . So it will not roll or fall. Remove the bolts from the pan using a 10 mm or so and a rachet and small extension. There are several bolts all around the pan. Remove the pan and remove the gasket. Clean up the pan and remove all gasket material from the pan. Install the new gasket around the pan and replace back.

Apr 05, 2009 | 1989 Ford Aerostar Cargo

1 Answer

Oil Change

hi you will need a jack.the drain plug is located at the verry bottom of the engine on the oil not know what motor you have, but look at the new oil filter,and try to locate the one on the car (it may be a diffrent color),use a oil filter wrench to remove the oil filter.use new oil to lubricate the new oil filter rubber gasket,and put on as tight as you can by hand (only.)

Jan 31, 2009 | 1995 Ford Aerostar

Not finding what you are looking for?
1992 Ford Aerostar Extended Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides