Question about Chrysler Sebring
Its right behind the front motor mount, on the radiator side of the engine. it bolts right to the transmission bellhousing
Posted on Nov 27, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The starter fuse also controls the fuel pump. Generally a bad fuel pump is at the heart of the problem. Have it checked out. Regards,Joe
PS kindly rate my answer. thank you.
Posted on Jan 28, 2010
Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.
Posted on Mar 26, 2009
you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.
Posted on Apr 28, 2009
All gas charged supports are not created equal. I recommend using O.E. for this application.
Snow,ice and trapped water make the lid heavier than it should be make sure these are not the issue.
Posted on Jan 19, 2010
Tips for a great answer:
Jan 31, 2014 | 2002 Chrysler Sebring
Mar 28, 2013 | 2002 Chrysler Sebring
Mar 20, 2013 | 2002 Chrysler Sebring
Feb 28, 2010 | 2002 Chrysler Sebring
Jan 28, 2010 | 2001 Chrysler Sebring
Nov 23, 2009 | 2002 Chrysler Sebring
Nov 07, 2009 | 2002 Chrysler Sebring
Jun 16, 2009 | 2002 Chrysler Sebring
83 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: