Question about 1993 Chevrolet Beretta

1 Answer

No brake fluid is coming out of the passenger's front brake line. what might be wrong?

Posted by on

  • willmott1474 May 11, 2010

    what do you mean? are you bleeding the system or what?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,627 Answers

Sound like you likely have a plugged flex line to that side of the car,if all the rest have pressure and get pressure from the same place,that would be the only explanation.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 95 Diamante and the front right brake froze. We can't get brake fluid to the caliber.


its possible that the rubber flexible line is blocked inside. you may have to replace it.

May 12, 2017 | Cars & Trucks

1 Answer

Rear passenger brake dosen't work


Are there two brake fluid reservoirs? And are both full? This would be a split-diagonal brake system-front driver and rear passenger are one brake system. Front passenger and rear driver are the other system. You have the one system working-the front passenger and rear driver side works. You will have to keep bleeding the rear passenger side and the front driver side-always start farthest from the master cylinder, but if that wheel just won't bleed air out, make sure the driver front is working and bleeds good. If all else fails, there are pressure bleeder kits available, I don't know the cost, but they work great. They are also a one man bleeding job, as I understand.

Dec 10, 2013 | 2000 Chrysler Concorde

1 Answer

Brakes not engaging


sounds like there is getting no brake fulid to the line check the brake line open the top part of the brake line and see if fluid comes and if it does then good then open the side from the wheel and if it doesnt then ist clogged and u need a new brake lin e

Feb 03, 2013 | Chevrolet Blazer Cars & Trucks

1 Answer

Brakes only working on driver side, rear and front, no brakes on passenger side rear and front. fluid good, lines good.


There only a few things that would cause this that you need to check, first start at the front wheel that doesnt work, have someone applie the brake open the bleeder screw if fluid sprays then caliper is bad or caliper slides are frozen, if no fluid comes out then you have a bad brake hose at that wheel, do the same to rear if fluid comes out of bleeder in rear then wheel cylinders are no good if no fluid comes out then brake hose to rear wheels is no good, make sure to have pedal pressed and repush pedal when checking the rear. hope this helps.

Aug 28, 2010 | 1994 Plymouth Voyager

1 Answer

Problems priming the brakes, no brake fluid to the front passenger side caliper


remove the hard line going into the hose and see if fluid comes out there. may need a brake hose. if fluid flows freely there and ur sure the bleeders no pugged up then the only solution is the brake hose

Aug 24, 2010 | 2004 Dodge Ram 1500

1 Answer

Bleed the brake lines


start at the passenger rear tire, have someone PUMP up brakes and hold pressure on them, release pressure by locating small bleeder screw, loosen screw 1/4 turn, brake fluid/air should come out, after brake petal reaches floor tighten bleeder, repeat process until only brake fluid comes out. go to driver side rear repeat, go to pass. side front repeat, go to driver side front repeat, after each bleeding make sure you check brake fluid in reservoir.

Sep 24, 2009 | 1984 Ford Mustang

1 Answer

How to bleed brakes to a 2006 honda


start by bleeding the fluid from the drivers front wheel first,till the fluid comes out. then the passenger front wheel then the rear right wheel then the rear left wheel, repeat again make sure to keep the aster cylinder full of fluid so it doesnt run dry. bleed till u get a steady stream of fluid from each of the wheels when bleeding them in the sequence ive stated.

Apr 03, 2009 | 2006 Honda Accord

3 Answers

Break bleeding


try bleeding the brakes as a system. start by making sure the master cylinder is full. then have a Friend step on the brakes and release 3-5 times. the last one they should hold as you break lose the bleeder on the passenger side rear, then do the driver side rear ,(check fluid) next passenger front and then the driver side front do each wheel until you don't see any or hear any air, thats the way i have always bleed brake systems. hope this helps

Feb 05, 2009 | 2004 Dodge Ram 1500

1 Answer

No fluid come out when bleeding brakes drivers side front


Brake rubber flex line could be collapsed,,or kinked,,,i suggest loosening of the line at the master cylinder distribution block (this will give you the ability of loosening off one line at a time,,and have some one push the brake pedal down,,if you see fluid at this point then you know it has to be the line or the caliper.
if you get no pressure from the distribution block then its the master cylinders fault

Jan 16, 2009 | 1997 Pontiac Sunfire

1 Answer

New brakes


Still have air inside, because you used gravity feed method.

Jul 17, 2008 | 2000 Chrysler Cirrus

Not finding what you are looking for?
1993 Chevrolet Beretta Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...