Question about 2004 Ford F150

1 Answer

Need to know where the map sensor is located - 2004 Ford F150

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

It usualy is the only electrical connection on the intake bolted on the engine. has 3 wires and most times opposite side of the throttle bodie

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of a MAP Sensor for 3.6L 2009 Saturn Outlook


This vehicle with this engine doesn't have a MAP sensor , has Mass Air Flow (MAF) Sensor

Sep 02, 2016 | 2009 Saturn Outlook XE

1 Answer

I need to replace the map sensor in a 2.4 alero but I do nor know where it located.


Here is a diagram of where the map sensor is located on this particular vehicle, i have also included the removal and installation procedures as well

Hope this helps....

REMOVAL PROCEDURE

  1. Remove the air cleaner outlet resonator.
  2. Disconnect the manifold absolute pressure (MAP) sensor.
  3. Remove the MAP sensor attaching screws (1).
  4. Remove the MAP sensor vacuum hose (2).
INSTALLATION PROCEDURE

  1. Connect the vacuum hose (2).
NOTE: Refer to Fastener Notice in Service Precautions.

  1. Install the MAP sensor attaching screw (1).
Tighten
Tighten the screw to 6.5 N.m (5.7 lb in) .

  1. Connect the MAP sensor connector.
  2. Reinstall the air cleaner outlet resonator.


asetech74_0.gifasetech74_1.gif

Sep 15, 2011 | 2000 Oldsmobile Alero

2 Answers

I am trying to locate where the map sensor is on my 2006 Chevrolet express 1500 4.3 van. I need to install a new one have the part but need to know where it goes.


I don't mean to be critical, but if you do not know where the MAP Sensor is, then you could not possibly have tested the MAP Sensor circuits. If the MAP Sensor circuits have not been tested, then there is no way that anyone can be certain that your vehicle actually needs a MAP Sensor. (Many MAP Sensor codes cannot be fixed by replacing the MAP Sensor itself.) Then again, you might just get lucky.

To answer the question you asked, The MAP Sensor is located on the passenger side of the intake manifold near the rear of the engine. You must remove the doghouse to get to it.

I recommend that you also review this article: What Else Could Be Wrong?

I wish you luck!

May 09, 2011 | Chevrolet Express Cars & Trucks

1 Answer

I am looking to replace my MAP sensor in my 2000 Pontiac grand am se. 2.4 Liter and I need to know the location?


MAP SENSOR LOCATION ON THE THROTTLE BODY.YOU HAVE TO REMOVE THROTTLE BODY MOUNTING SCREWS TO REMOVE.MAP SENSOR WILL HAVE A VACUUM LINE HOOK TO IT.THAT WILL MAKE LOCATING IT EASIER.

Sep 01, 2010 | Pontiac Grand Am Cars & Trucks

1 Answer

I need to know where the map sensor is located on a 97 expedition 5.4l


Hi my name is mike ! your Expediton should only have a mass air flow sensor but not a map sensor the mass air flow sensor is located on the large hose going to the intake manifold closer to the air cleaner ,can I ask why you want to find the map sensor?

Aug 08, 2009 | 1997 Ford Expedition

1 Answer

Need the location of the mapping sensor for a 1994 chevy caprice


Hello l_anderson36: My name is Roger and I will help you. You should find the map sensor at the front of the engine. Located on the drivers side of the engine. The sensor will have a plug with three wires on it.
Should you need further help please just ask. Please rate the quality of this answer. This way we know your answer helped. Thank You for using Fix Ya.Roger

Aug 07, 2009 | 1994 Chevrolet Caprice

1 Answer

Need HELP! locating the MAP sensor and the Camshaft sensor for an


The MAP sensor is on the breather hose next to the breather box,The speed sensors are pictured below.Please take time to rate this a fixya.
7bd05af.gif

May 16, 2009 | 1996 Plymouth Grand Voyager

3 Answers

I need to locate the map sensor on my 98 grand prix to change it i know its on the manifold but not sure exactly where.


Your engine doesn't use a MAP sensor (Manifold absolute pressure), it uses a MAF sensor (Mass Airflow), they both provide the same information about engine load but in a diff way. here is a picture of your sensor.
9a5375f.jpg

Mar 17, 2009 | 1998 Pontiac Grand Prix

1 Answer

Map sensor


Hi...

On a 2.2 L. the map sensor is located Near the throttle body assemble. on intake manifold.

On a 3.0 L. Is located near the ECM on top of the intake manifold..

OK.. I hope you found if Not. Let me know .
I will looking for diagram to send.


Thank you for use fixya.

Jul 27, 2008 | 2003 Saturn Ls 4dr Sedan

2 Answers

Kia MAP sensor


do you still need help? let me know

Jun 24, 2008 | 2004 Kia Optima

Not finding what you are looking for?
2004 Ford F150 Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...