Question about 2003 Acura 3.2CL
Remove the positive battery cable...Remove the baffle that is in front of the air filter housing (2 plastic clips)...Pull the over flow container up and out...You will see a gray 2- wire connector under the light cover...Push down on the tab until it clicks...Pull back to release it...Now you can remove the cover over the bulb. It requires the use of a #20 Torx with a security tip. This tool is worth the $20 cost and can be purchased at major tool stores. You can find it quickly at; www.wihatools.com. Part #70142...When handling the new bulb it is EXTREMELY IMPORTANT to wear a pair of latex gloves...Skin oil transferred to the surface of the bulb will ruin it...Pull the old bulb and note the position of the electrode...Make sure the new one goes in straight; No twisting...Hold the bulb backing and install the locking clip.
There is a safety statement on the back of the headlight cover which is a little over the top which warns of 24,000 volts. With the battery disconnected there is no voltage present.....
Posted on Feb 08, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 06, 2016 | 2003 Acura 3.2CL
Aug 13, 2014 | 2003 Acura 3.2TL
Jun 27, 2011 | 2003 Chevrolet Cavalier
Dec 30, 2009 | 2003 Volkswagen Beetle TDI
Dec 09, 2009 | 2003 Acura 3.2TL
Nov 12, 2009 | 2003 Acura RSX
Nov 08, 2009 | 2003 Pontiac Grand Am
Jul 08, 2009 | 2002 Acura 3.5RL
Oct 12, 2013 | 2003 Acura 3.2CL
156 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: