Question about 2000 Volkswagen Jetta TDI

2 Answers

2000 VW jetta VR6 windshield wipers wont work

2000 VW jetta VR6 windshield wipers wont work

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volkswagen Master
  • 1,675 Answers

First try the fues box see if you have a blown fues, next if you put your wipers on can you hear the motor running for them? if you can the linkage has poped off from the motor, its a bit awkward to get it back on and no gaurentee that it will saty on, you might have to replace linkage, or, it might be the cogs on the actual wiper arms have splayed and are now smooth so they dont grip to move, you can take them off by the nut on the arm , get a can (coke can or simular) cut a rectangle out of it the hight and width if the cog, rap it round the cog, (make sure it does not overlap on the ends) and force the arm back into place and then do the nut up, this is just a short quick fix if that is the case you will have to replace the motor, also you can check the relay to the motor in the fues box, give it a tap a couple of times it might work again if not replace it...hope you find these sugestions helpful

Posted on Feb 08, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volkswagen Master
  • 14,036 Answers

CHECK WIPERS FUSE.IF FUSE GOOD. CHECK FOR POWER TO WIPER MOTOR IF YES WIPER MOTOR BAD IF NO POWER TO WIPER MOTOR THE SWITCH IS BAD OR LOOK FOR A LOOSE OR BROKEN WIRES.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 jetta wipers wont work


Washer fluid is probably frozen, have you checked the fuse for the wipers? There should be an overload protection in case the blades stick

HTH

Jan 15, 2013 | 2000 Volkswagen Jetta TDI

1 Answer

I'm trying to buy a good vw jetta, I found one


Most VW are interferance motors. That would mean the pistons could have hit some valves. I would stay away.
Also have you seen the motor? I may be off but I thought the VR6's had a chain. Even if, its still an interfernce motor.

Oct 07, 2011 | 2000 Volkswagen Jetta TDI

2 Answers

Ignition coil firing order for 2000 VW Jetta VR6


Jetta GL & Jetta GLS (two versions with 2.0 l and 115 CV engine)

2000 Volkswagen 2.0 liter SOHC L4 (AEG)

zjlimited_264.gif




Jetta GLS VR6 y Jetta GLX VR6 (2.8 l VR6 and 200 CV engine)

2000 Volkswagen 2.8 liter DOHC V-6 (ATQ)

zjlimited_263.gif


Hope helps.

Mar 22, 2011 | Volkswagen Jetta Cars & Trucks

1 Answer

I have a 2000 vw jetta, when i turn on wiper blades i can hear the motor but the blades are not engaged


Wiper motor arm disengaged or slipping on drive shaft.

Wiper arms slipping on splines at pivot point of wiper arm.,,,more likely.

Wipers are held to drive splines with a 10mm nut.

Make sure wipers are in in 'parked' position buy turning on ignition and making sure wiper switch is OFF.

Turn off ignition.

Pry off the black round plastic cover off the arm where it attaches at the splines. ( Drive splines on lower windshield cowl.)

Tighten nut/s.

Jan 19, 2011 | 2000 Volkswagen Jetta TDI

1 Answer

My transmission on my 1995 vw jetta lll glx vr6


the clutch may burn out on those gear, check the fluid if it smell burn

Feb 24, 2010 | 1995 Volkswagen Jetta

1 Answer

Windshield wipers on 2007 VW jetta not swiping


wiper gears may be broken, got to junk yard and buy motor and gear assembly for windshield wipers, should only take an hour to change out.

Feb 15, 2010 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

Why after charging the battery in a 2000 vw jetta this wont start


SORRY TO TELL YOU WHEN DISCONNECT BATTERY ON VOLKSWAGONS.YOU MUST USE A MEMORY SAVER.IN CIGARETTE LIGHTER.TO KEEP COMPUTER MEMORY.IF YOU DONT.YOU HAVE TO GET A SPECIAL SCANNER TO REPROGRAM CAR LIKE THE DEALERSHIP.

Jul 26, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

Jetta vr6 timing


need timing for vw jetta 2000 vr6

Apr 01, 2009 | 2000 Volkswagen Jetta TDI

2 Answers

Signal and windshield wiper aren't working


switch in steerig console combo wiper turn?

Mar 01, 2009 | 1999 Volkswagen New Jetta

Not finding what you are looking for?
2000 Volkswagen Jetta TDI Logo

2,169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...