Question about 1993 Mitsubishi 3000GT

Open Question

1993 Mitsubishi 3000GT DOCH 3.0 Non turbo starting up the dies.

My 93 3000GT has been sitting up for quite some time and my dad and me have been working on it recently and we decided to start it up and it does but it can only stay running for about 5 seconds and then shutters some and cuts off. This has been very repetitive. It always starts up the same we can rev it about 3 times and then it just cuts off. We have replace the fuel filter and the fuel pump and now it runs for about 30 seconds and then cuts off again. Ive read some answers on hear and they say it could be a bad ECU capacitor i just want to verify that. thanks

Posted by on

  • Beung Kim Dec 04, 2010

    Hey was wondering what rpm is it idling at? It might be the idler screw. Write me back.

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 24 Answers

SOURCE: 1990 mitsubishi eclipse wont stay running

ok heres the thing when a car sets for a long time you have to do more then just clean the tank you also need to flush and replace all fluids in it and replace the fuel filter (that one is key because it empties out the fuel lines and injectors) and also please do youself a favor and replace the timing belt i can not stress that enough every 60,000 miles or 18 months please just to be safe replace the timing belt these 6 bolt 2.0 engines are great and so easy and cheap to build but if you brealk that timing belt you will be buying a new engine but truth be told sonds like you have and intake sensor thats gone out pop ur air can off and check the mas for a wasp nest or something like that

Posted on Mar 25, 2009

shark2th667
  • 343 Answers

SOURCE: i have a 91 3000gt with non turbo i want to put

even though harness may be compatible, all your ignition components will vary, get a manual on both engines with wiring diagrams before proceding.. you will need help of an expert at these modifications

Posted on Sep 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 93 F250 7.3 diesel non turbo. The other day i went to fire it up and i turned the key and it never even cranked over. All the lights and electronics died and my radio presets reset. I had to take...


You have a bad battery cable or one that is corroded or loose. My '93 f-250 7.3 non-turbo did the same thing.The give away to the problem is the radio presets are disappearing. Check that the cable ends are CLEAN and TIGHT. If that isn't it, the cable itself may be bad look for swolen or cracked insulation or even heat damage on the cables.

Jan 20, 2011 | 1993 Ford F250

1 Answer

I have a 1993 3000gt non turbo and the clutch pedal is on the floor i can not find a fluid canister for my tranny and am about to have a new clutch, pressure plate, and throwout bearing put in. is the...


It might simply be your slave cylinder or slave master cylinder that's bad and leaking. They cost a hellofalot less than an entire clutch replacement, that you are about to do. Have those two items checked first.

Oct 25, 2010 | 1993 Mitsubishi 3000GT

1 Answer

I need to get directions for timing belt installation on 1996 mitsubishi 3000 none turbo


buy a shiltons maintance book for your car at autozone 20dollars its nall in there good luck

Jun 25, 2010 | 1993 Mitsubishi 3000GT

1 Answer

Will 1991 mitsubishi 3000gt door glass fit a 1993


it should. they are both 1st gen. body style. same with a stealth, it will work too.94 is start of the second gen. body

Feb 14, 2010 | 1993 Mitsubishi 3000GT

1 Answer

Need the vacuum hose diagram for a 1998 mitsubishi eclipse 2.0 doch non turbo


http://www.dsmtuners.com/forums/attachments/420a-bolt-tech/89827d1228187918-resolved-need-vacuum-line-help-fast-420aturbovac-boostlinesstock.jpg
hope this helps

Oct 20, 2009 | 1999 Mitsubishi Eclipse

1 Answer

Mitsubishi gto v6 1993


check any inlet pipes for leaks, also have you had a new timing belt fitted? if so double check that the timing marks all line up,you could also part any visible(and not so visible ) electrical connectors,clean and give a good spraying with wd40

May 26, 2009 | 1993 Mitsubishi 3000GT

1 Answer

Engine shuts off


I have a 1991 Dodge Stealth RT Twin Turbo and had this exact same problem, it started off as a slight flutter, like i was loosing fuel pressure, then it soon after began completely shutting off like yours.. turns out I fixed it by replacing all 3 ignition coils. and now it runs like a charm.... give that a try. i got mine at auto-zone for around 60 dollars a piece, and there are 3 total.

Jan 24, 2009 | 1992 Mitsubishi 3000GT

2 Answers

Should I test drive a car that has just been sitting for 2 years?


Hello
1 would service it with fluids and tires
before driving it any where.
the old fluids are contaminated

Jan 18, 2009 | 1995 Mitsubishi 3000GT

Not finding what you are looking for?
1993 Mitsubishi 3000GT Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...