Question about 1995 Nissan Pickup

1 Answer

THe 4 wheel drive shows that it is engaged but it is not. We just replaced the axels on the front and it still does not work. HELP!!!!!!!!!!!!!

Posted by on

1 Answer

Why did you replace the axles. Just wondering because I was about to buy one, nissan ,not an axle.. I would say maybe something was not put back during the axle R&R if you had 4 wheel previously. That doesn't answer your question but my two 4x4's have vacuum hoses and some veh have selonoids that go to the front axle to operate whatever mechanism moves the fork in the axle ,to connect to one side off the diff. Keep in mind that you really only have one axle driving in 4x4,both front and back ,unless you have an aftermarket airlocker.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Every thing work for my 4wd onvmy 2000 gmc z71 pickup the switxh actuators transfer case and diff but the front tires won't turn u can hear the transfer motor work and the actutor engagin but the front...


jack up front wheels turn a front wheel it should turn front drive shaft with 4wd engaged and the other wheel should turn backwards if it does that part is good if not possible broken axel

Feb 20, 2015 | GMC Cars & Trucks

1 Answer

4 wheel drive doesnt work.front driveshaft is working.front tires will not engage


i am not sure but i think you have an electric motor on your front axel that engages the 4 wheel drive. check that to make sure it is engaging. a haynes manual would really help you out with this.you can get one at most parts houses for around 15 bucks.

Dec 26, 2010 | 1988 Chevrolet K1500

1 Answer

My 2004 f150 does not always work in 4 wheel drive but I replaced a vacuum line that goes to the front acuator on the front axel, then i replaced the right front hub assembly with a used one and the 4...


The IWE is operated by a common vacuum system. When you say does not work, not sure what you are getting at ( only 1 wheel locks into place, or neither ).

Could be you had the vent and vacuum lines reversed, and this did not keep the IWE gear pulled out and it rounded off on the one you did not replace.

Is the issue the front axle does not lock in, or does the drive shaft not lock in at the transfer case ?

Lift and support the front of the truck so the front wheels are off the ground ( take safety precautions, chock wheels, jack stands, etc )
Key on, engage 4x4 and try to turn the front drive shaft.
If it turns it is a problem with the transfer case.
If it doesn't it is a front axle engagement problem.

When you get to this point, post back a comment to this problem with the info.

Nov 10, 2010 | 2004 Ford F150

1 Answer

1992 chevy k2500 4 wheel drive not engaging. was driving in 4 high with no problems. shut truck off and no 4wd. no lights and no 4wd. new rear end, new transmission.


I have a 19934x4 bought it with 4 wheel drive notworking. indicator lights for 4x4 would notlight up but transfer seemed to be shiftin ok. frontaxel woul ot ingauge. I repled the front axel actuator an works fine now no problem. actuator is on the passenger sid back of the front axel pigand has a plug, mine was 2 wireroundpin plug but some have a flat pin 4 wire plug. 70 dollars at NAPA. wasa realy simple replacement didnt even need to jack up the truck. the actuator h a pin that electronically puses out engauging te front axel. a easy test is to put the truck in 4 wheel high. holdthe brak and givei little gas ad havesomeoneelse stand to the side ofthe front of the truck and see if the front axel spins. ifso th actutor is te most likely prblem. hope this helps.

Dec 11, 2009 | 1993 Chevrolet K2500

2 Answers

1998 Chevy S10 front axle will not engage when put into 4 wheel


Normal thing that happens as long as onone (worked) on it, is the vacume hose going to the engage sevevo under the battery box has fell of on either end or is brocken on the way there. Then the once or now leaky battery acid ate up this same servo. then the cable going to the front axel breaks sticks falls off or even someone needing one climbed under your truck while parked somewhere to get one to replace their brokeen one now you don't have one then theaxel engage arm or gearset is damaged

Aug 16, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

4 wheel drive light is on in my jeep


vacumn pod on the front axel is stuck on. Jack up the front wheels spin both tires at the same time and see if the front drive shaft turns. If it does the 4x4 on the axel is engaged. The front drive shaft on these should not turn when vacumn pod is disengaged. YJ's have a split axel on the right side inner axel shaft.

Apr 10, 2009 | 1992 Jeep Wrangler

2 Answers

Front drive, 4 Wheel drive won't engage


that vacume line goes back to the transfer case, the end that goes behind the motor hooks to a steel tube so it does not get hot from the exhaust., my guess it should be hooked up so it will feed vacume to the vacume ball so it can lock in the axels. if you start the car and shift into 4 wheel drive and listen under hood you should hear a hissing sound, that is vacume, if you can't hear it there, you may have to craw under the right side to hear it, probably came unhooked underneith the car

Feb 01, 2009 | 1995 GMC Jimmy

3 Answers

4 wheel drive problem on Jeep YJ


you can also check the 4 wheel drive vacuum switch on top of the transfer case...got mine for 10 bucks from parts store...fixed the problem

Dec 21, 2008 | 1992 Jeep Wrangler

1 Answer

1999 Chevy 4x4 engaging


Check the solenoid at the front axel. This is a rather common prob. First check that power is at the axel, got power, clean and put it back. Please do not even look at the tranfer case! At worst you may need to replace the axel solenoid! Frankster016

Nov 22, 2008 | 1999 Chevrolet Silverado 1500

2 Answers

4 WHEEL DRIVE


Try to replace the vacume lines to the actuator on the front axle?

Oct 14, 2008 | 1995 Jeep Wrangler

Not finding what you are looking for?
1995 Nissan Pickup Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...